Step-By-Step Wizard

From Open Tech Dental Wiki 4.0
Revision as of 08:43, 11 June 2016 by Democenter (talk | contribs) (Created page with "在所有的嚮導步驟,所有的其它工具將被鎖定.所有交互將在屏幕右上方的"嚮導面板"中處理")
Jump to: navigation, search


引導精靈

當操作一個結構化專案, OpticalRevEng Dental 提供一個嚮導,引導用戶從第一步掃描儀採集到數據導出。

嚮導界面

當啟動嚮導模式,軟體界面的變化:

  • 主工具列 消失
  • 代替的專案樹狀圖, 有一個提醒用戶完成與下一步嚮導步驟列表.
  • 在應用程序的右上角, 有嚮導本身將引導用戶,並且只有4個按鈕可操作
    1. Dental 2 5 wiz prev.png : 返回到嚮導上一步
    2. Dental 2 5 wiz skip.png : 跳過當前步驟
    3. Dental 2 5 wiz quit.png : 關閉引導精靈並繼續手動工作*# Dental 2 5 wiz next.png : 確認當前步驟並繼續到下一步

在所有的嚮導步驟,所有的其它工具將被鎖定.所有交互將在屏幕右上方的"嚮導面板"中處理

Dental 2 5 wizStart.jpg

Wizard Sequence

The sequence of wizard steps depends on each specific project. It follows this logic:

  1. Acquire all the required data from the scanner
  2. After every single acquisiton:
    1. Clean the acquisition from the support holder and duplicated data
    2. Align the acquisition to the rest of the project and check the alignment if needed
  3. Check that all the information is correctly aligned
  4. Generate the needed meshes
  5. Align the implants
  6. Export to the CAD
Dental 2 5 wiz prev.png Homebutton.png Dental 2 5 wiz next.png