Project Creation

專案

當直接啟動軟體時, 如果沒有由其它數據庫(如Exocad DentalDB)定義好的專案 , 掃描專案需要定義.

該軟體有一個 專案經理 對話框收集被掃描物件的所有資訊以準備特定的 引導精靈.

該專案經理允許通過點擊左側欄中的圖標以選擇一個可用的專案類型

在所有專案, 用戶必須定義一些 常規訊息:

• 病人 ID (強制)
• 醫師 ID (可選)
• 一個特定的專案名稱以供存檔, 如果沒有則自動升成一個以病人ID為基礎的專案名
• 設計者姓名 (可選)
• 備註 (可選)

當專案定義好, 通過點擊對話方塊底部的綠色圖標來確認它. 軟體將創建一個特定的 結構化專案 並啟動 引導精靈.

固定義齒專案

點擊義齒圖標以定義專案

義齒的部分是最複雜的,因為要一個牙齒一個牙齒的定義元件

除了 常規訊息 外, 這個專案顯示了另外的2個部分

專案定義

在主視窗的一部分是一個可以定義掃描元件的齒位圖.

當點擊牙齒時按住 , 所選擇的牙齒定義會從上一個牙齒複製.

當點擊牙齒時按住 , 上一個牙齒的參數會複製到上一個牙與當前選定牙之間的所有牙齒.

牙齒訊息

在右下角的部分可以對每一個元件選擇 牙齒類型 與一些 其他選項 . 牙齒的類型有:

無 

這顆牙不是專案的一部分,它不會被獲取或是被忽略

健康齒 

這顆牙是石膏型的主要部分, 它能與模型的其他部份一起獲得

支台齒 

這顆牙是可移動代型,它能單獨或在多代型支援上獲取

缺失牙 

2個支台齒中間的缺失牙, 它是一個橋體的中間元件

種植體 

在這個位置上有一個種植體, 因此將掃描一個掃描桿

咬蠟 

這顆牙是咬合印記的一部分

每一個牙齒類型在專案定義方案中都有特定的顏色.

The Other Options are:

Gingiva 

this element is mounted on an artificial gingiva that has to be acquired separately from the stone model

Pre-Op

the anatomy of this element is part of an additional model that will be acquired separately and then aligned to the reference stone model

Waxup 

over this tooth position, it's possible to scan a Pre-Modelled Waxup that will be aligned to the rest of the stone model

Additional Parameters

In the general information section, there are some additional parameters:

Articulator Box

Select how the models are kept in articulation:

Matching models 

to scan the occlusion if there is no need to use the automatic positioning in Exocad's Virtual Articulator

Articulator A 

to scan the Artex Articulator and to use the same in Exocad's Virtual Articulator

Articulator S 

to scan the Sam Articulator and to use the same in Exocad's Virtual Articulator

Articulator P 

to scan the Kavo Articulator and to use the same in Exocad's Virtual Articulator

Model Type Box

Select which specific workflow to use:

Sectioned Model 

default workflow, in which every element is acquired separately and all the information gets merged at the end

Impression Scan 

if the Impression Scan Module is enabled in the license, check this option to scan an impression and not a stone model

All In One 

if the All In One Scan Module is enabled, it is possible to scan all the parts of a Quadrant Trye in just one step

Unsectioned Model 

enable this option if the model to be scanned is not sectioned, the scanner will not require a separate scan for every die

Here below an example of a defined prosthesis project for a 3-elements bridge with a stone antagonist:

Multi-Die Project

Use the Multi-Die Project to scan different dies from different patients in one single project:

To set the case, click on each multi-die position and define the name of each patient in the Patient field.

Orthodontic/Scheletric/Impression Project

The Orthodontic, Scheletric and Impression Projects are straightforward and similar to one another.

These projects require the user to select the whole jaws instead of individual teeth.

When the project definition is confirmed, the software will prepare the Project Tree to acquire the data from the scanner.

Project Editing

If the project definition needs to be changed while already in use, it is possible to select the Edit Project tool in the File Menu or in the Project Toolbar (See Support Toolbars And Menus).

This tool will open again the Project Manager with the current project definition. It is possible to change the project definition and the parameters of every tooth.

When the editing is confirmed, the software will adapt the Project Tree. Editing an already scanned, or partially scanned, project can cause data loss.