Difference between revisions of "Man ImplantAlign/ja"

From Open Tech Dental Wiki 4.0
Jump to: navigation, search
(Created page with "= マーカー取得 =")
(Created page with "インプラントのプロジェクト用にデータを取得する際、インプラント自体を取得するのには問題があります。スタンプや石膏模型...")
Line 3: Line 3:
 
= マーカー取得 =
 
= マーカー取得 =
  
When acquiring the data for a project on implants, acquiring the implant itself is problematic. It's not like a stump or a piece of stone model. The implant connections/interfaces are normally small and metallic.
+
インプラントのプロジェクト用にデータを取得する際、インプラント自体を取得するのには問題があります。スタンプや石膏模型の一部を取得するのとは異なります。インプラントのコネクション/インターフェースは通常小さく、金属製です。
  
 
Moreover, the fitting has to be mechanically perfect, with no margin of error.
 
Moreover, the fitting has to be mechanically perfect, with no margin of error.

Revision as of 09:18, 27 December 2015


マーカー取得

インプラントのプロジェクト用にデータを取得する際、インプラント自体を取得するのには問題があります。スタンプや石膏模型の一部を取得するのとは異なります。インプラントのコネクション/インターフェースは通常小さく、金属製です。

Moreover, the fitting has to be mechanically perfect, with no margin of error.

To solve this problem, the implant connection is not directly scanned but an Implant Marker or Scan Body is used in its stead. A Scan Body is a specific object, designed to be scanned, which fits exactly over the implant.

The scan of the implant marker itself is not enough: its resulting data will be used to compute the exact position of the implant interface. In order to carry out this operation, an Implant Library is needed .

The alignment to the implant library can be performed in the CAD software. However, using an implant library for Exocad's Platform, the user can perform this operation directly in the scanning software OpticalRevEng Dental, in order to get better results.

Implant Selection

After the mesh generation, by selecting the mesh of an implant marker from the project tree, the Marker Alignment button will appear in the Main Toolbar. Click on this button to open the Implant Selection dialog.

Dental 2 5 implantSelection.jpg

In this Dialog there are:

  1. A tooth position selection (the button with three dots ...) that can be used only in Free Mode to select the tooth position of an implant
  2. An implant list with all the implants available in the current Implant Library
  3. A Filter box where it is possible to write part of the name of the needed implant. All the implants that match the name will be showed in the implant list

Select the implant to be used and click the Select Button.

Attention while choosing the right implant from the library. Many implant libraries have different versions of every implant connection. For example:

  • Engaging Connections : the connection can not rotate on the implant, suggested for abutments or single restorations
  • Not-Engaging Connections : the connection can rotate on the implant, suggested for bars and bridges
  • For Zirconia : connections with specific shapes, suited for zirconia restorations

If the wrong implant is selected, it is possible to repeat the procedure to replace the old aligned connection with a new one.

If the CAD design is launched using a wrong connection it will be necessary to restart all the design from the beginning

Marker Alignment

When selecting the implant connection, the software will start the Manual Alignment mode.

The acquired marker mesh will need to be aligned to the library marker shape. From this data the connection position will be computed.

This procedure has to be performed for every marker of the project. The CAD Export will issue a warning if one or more marker alignments are missing.

Dental 2 5 wiz prev.png Homebutton.png Dental 2 5 wiz next.png