Step-By-Step Wizard

Step-By-Step Wizard

Cuando se trabaja en un "Proyecto Estructurado", OpticalRevEng Dental proporciona un asistente para ayudar al usario durante todo el proceso de escaneo.

Interfaz Asistente

Al iniciar el "Modo Asistente", se modifica la interfaz del software:

• LaBarra de Herramientas Principal desaparece
• En lugar del Arbol de Proyecto, se encuentra una lista de los Pasos del Asistente que muestra al usuario los pasos que ya se han completado y los que
• On the Top Right corner of the application, there is the Wizard itself that will guide the user and that can be handled with only 4 buttons
  1.  : to return to the previous wizard step
  2.  : to skip the current step
  3.  : to close the Step-By-Step Wizard and continue to work manually
  4.  : to confirm the current step and proceed to the next one

During all the wizard steps, all the other tools will be locked. All the interactions will be handled in the Wizard Panel on the top right of the screen

Wizard Sequence

The sequence of wizard steps depends on each specific project. It follows this logic:

1. Acquire all the required data from the scanner
2. After every single acquisiton:
   1. Clean the acquisition from the support holder and duplicated data
   2. Align the acquisition to the rest of the project and check the alignment if needed
3. Check that all the information is correctly aligned
4. Generate the needed meshes
5. Align the implants
6. Export to the CAD