Man ImplantAlign/zh-hant

標記對齊

當為一個種植體專案採集數據,採集種植體本身是有問題的.它不象基牙或部份代型模式.種植體連接/接口通常很小並且是金屬

此外，該接頭具有機械地完善,沒有誤差的邊緣。

為了解決這個問題,種植體連接不直接掃描而是用 種植體標記或掃描桿代替它使用.一個掃描桿是一個特定物件,設計成被掃描,恰好適合種植體.

種植體標記本身的掃描是不夠的:其產生的數據將被用來計算種植體界面的精確位置.為了進行這項操作植體資料庫 是必須的

植體庫中的對準可以在CAD軟體中被執行.然而，為了得到更好的結果,用戶可以直接執行此操作在使用Exocad平台植體庫的掃描軟件OpticalRevEng Dental上,

植體選擇

網格步驟後,從專案樹狀圖中選擇植體標記的網格."標記對齊"按鈕會出現在 主工具列. 點擊此按鈕打開"選擇種植體"對話框.

在這個對話框有：

1. 牙齒位置選擇(改變 ...) 只能被用在 自由模式 去選擇種植體的牙齒位置
2. 選擇資料庫 鈕, 打開資料庫選擇面板
3. 標記預覽菜單中, 一旦適當的接口已被選擇為當前元件, 將顯示在當前資料庫的標記STL檔. 可以選擇不同的視角來檢查標記的形狀

要繼續標記選擇點擊 選擇資料庫 按鈕. 植體選擇面板將打開.面板劃分成4個部份

資料庫

For choosing the general connection and implant family, contains:

1. A Filter box where it is possible to write part of the name of the needed implant. All the implants that match the name will be showed in the implant list
2. An implant list with all the implants available in the current Implant Library

Type and Sub Type

For Choosing the diameter and type of connection. There can be many of these types, in our libraries for instance there are:

• Engaging Connections : the connection can not rotate on the implant, suggested for abutments or single restorations
• Not-Engaging Connections : the connection can rotate on the implant, suggested for bars and bridges
• For Zirconia : connections with specific shapes, suited for zirconia restorations

Preview

Shows the preview of the STL marker present in the library

Info

If the library is correctly configured to work with our software, in this section it is possible to have a small overview of the libraries with additional information on the availabe diameters and implant types. All our libraries are provided with this feature and, being connected to this wiki, the Open in browser button opens the wiki on the implant list page.

To accept the implant selection click on Select, otherwise Cancel.

If the wrong implant is selected, it is possible to repeat the procedure to replace the old aligned connection with a new one.

If the CAD design is launched using a wrong connection it will be necessary to restart all the design from the beginning

Marker Alignment

When selecting the implant connection, the software will start the Manual Alignment mode.

The acquired marker mesh will need to be aligned to the library marker shape. From this data the connection position will be computed.

This procedure has to be performed for every marker of the project. The CAD Export will issue a warning if one or more marker alignments are missing.