Man Acquisition/zh-hant

採集

從掃描儀採集資料與創建一個物件的虛擬3D描述是 OpticalRevEng Dental 軟體的主要功能.

有關引導精靈的更多訊息, 請點擊 採集精靈 網頁.

在 結構化專案 精靈以外, 有3種方式從掃描儀獲取資料.

簡單的

這是最容易獲取資料的方法,大多用:

1. 將在適當模型架上的物件放入掃描器內
2. 在 專案樹狀圖 上選擇掃描物件
3. 點擊在 主工具列 的獲取圖標

掃描儀將使用選定元件的策略獲取物件圖像並更新專案樹狀圖 的狀態.

進階參數

要使用與默認不同的採集策略,當點擊獲取圖標時按住 鍵

一個附加對話方塊允許選擇不同的策略與需要獲得對象的顏色

動態咬合

如果 動態咬合模組 被啟用及使用,軟體會提醒用戶在適當的底板上掃描牙顎

使用的底座取決於在定義專案時選擇的咬合架類型

If the base type doesn't match the type of articulator, the positioning in Exocad Virtual Articulator won't be correct.

多代型

為了在單一掃描獲取多個代型(即使是分別在上下頷),使用多代型支持

1. 從專案樹狀圖中選擇所有要被掃描的代型
2. 點擊將出現在主工具列的多代型掃描鈕.在專案樹狀圖中最少選擇2個代型
3. 依軟體右上角視窗的顯示把代型放入支持的空洞中,然後把多代型支持放入掃描器
4. 點擊開始採集鈕

掃描儀將獲取資料,識別每一個單一代型及更新"專案樹狀圖"的狀態

單一採集

要獲取一個單一的3D圖像，而不是一個360°的對象重建（用於測試或獲取一個大的咬合於一個小的掃描儀中）：

1. 將物件放入掃描儀最適當的位置
2. 使用 單一採集 工具

The software will carry out a single acquisition without moving the motors system

Integration

After an object has been acquired in the scanner, there could be the need to add further information to the starting scan. For example, part of the object may be missing due to shadows or because the acquisition strategy has not covered a specific point of view.

In order to integrate additional information, use the Integrate Acquisition button on the Main Toolbar. This will launch the Integration Mode, providing 3 different integration tools. It is possible to switch from one tool to another. Confirm the modification with the Apply button or discard it with the Cancel button.

It is possible to add an unlimited number of acquisitions but adding to much data could slow down the project and increase the project disk size.

Single

The single integration mode allows to add information from a specific point of view. To add information:

1. Rotate the 3D view so that the screen will show exactly the part of the object to be integrated
2. Click on the Start Integration icon

If the last added acquisition is not good, useless or problematic, it is possible to remove it with the Undo button.

If the object is not in the original scanning position, the software can not correctly integrate the information. It is possible to try to fix this problem using the Calc Integration Position button.

Custom

The Custom mode, instead of scanning one position at a time, allows to create a costumized sequence of positions and then the scanner will carry out all the acquisitions together.

To add a position:

1. Rotate the 3D view so that the screen will show exactly the part to be integrated
2. Click the Add Position button

To remove a position:

1. Select the position from the list
2. Click the Remove Position button

To start the scan, click the Start Integration button

Full

The full integration is the easiest mode: it allows to select as many positions as needed and in which degree the plate must tilt to complete the image.
Then, by clicking the Start Integration button, the scanner will tilt the model and carry out a 360° acquisition using the selected number of positions.

Change Strategy

When the Project Tree is created, the software will select a specific strategy for every element, trying to maximize the scan quality and saving space. To change the strategy of an element of the project:

1. Right click on the element in the project tree
2. Select Change Strategy
3. Select the new strategy from the dropdown menu

Another scan of the object will be carried out using the new strategy instead of the old one.