Pc Minimum Requirements

From Open Tech Dental Wiki 4.0
Revision as of 13:41, 27 August 2015 by L.Pizzoli (talk | contribs)
Jump to: navigation, search
Other languages:
العربية • ‎Deutsch • ‎English • ‎español • ‎français • ‎italiano • ‎日本語 • ‎português do Brasil • ‎română • ‎русский • ‎Türkçe • ‎中文(繁體)‎

Reccomended Systems

Our Scanners require the Computer to meet specific requirments.

To simplify we recommend two reference systems from DELL:

  1. Alienware X51 R2 (with Intel i5) for Easy and Smart Scanners
  2. Alienware X51 R2 (with Intel i7) for Deluxe Scanners

Minimum Requirements

Software

These are the minimum requirements our software needs:

Component Requirement
Operating System Windows 7/8/8.1 (64 bit)
CPU Intel® Quad Core ™ or Better
RAM 8Gb RAM or Better
Video Card NVIDIA GeForce GTX 560 Ti or Better *
NVIDIA GeForce GTX 660 or Better *
NVIDIA GeForce GTX 745 or Better *

The Video Card has important additional requirements:

  • Only NVIDIA GeForce cards are supported by the system
  • The NVIDIA QUADRO line is not supported
  • The name scheme for the NVIDIA cards is complex as can be seen in this page. To check if a card is better than another you need to check the 'Core Config' column of the table. A card with less than 300:40:30 cores is not supported. Particular attention has to be given to the appendix of the card name. The GTX 560 Ti is good enough but the GTX 560M is not

Scanner Connection

Different models of scanners have different connection requirements, be sure to check here the needed connection for your scanning system.

USB 2.0 Scanner with 4 cables

The previous scanning systems connects through 4 cables

  • 2 USB 2.0 Ports that need to be connected directly to the Computer's motherboard (External Hubs are not supported). Every port needs to erogate at least 500mA
  • 1 USB 2.0 or 3.0 Port
  • 1 HDMI Port

The USB 2.0 system is not 100% compatible with the USB 3.0 system. If this scanner model is connected to a USB 3.0 port the system may freeze or not work properly.

USB 3.0 Scanner with 2 cables

2015's scanning system connects only through 2 cables

  • 1 USB 3.0 Port that needs to be connected directly to the Computer's motherboard. Only Intel C220 or Better and Rensas USB 3.0 are supported. Other USB chipsets are not guaranteed to work.
  • 1 HDMI Port