Pc Minimum Requirements
Warning: Display title "Pc Minimum Requirements" overrides earlier display title "Requisiti Minimi del PC".
Contents
Sistemi Consigliati
I Computer che vengono connessi ai nostri scanner devono rispettare dei requisiti minimi specifici.
Per semplificare la scelta, come riferimento, consilgiamo due sistemi DELL:
- Alienware X51 R2 (with Intel i5) per i modelli Easy e Smart
- Alienware X51 R2 (with Intel i7) per gli Scanner Deluxe
Requisiti Minimi
Software
Questi sono i requisiti minimi necessari per il funzionamento del nostro Software:
| Componente | Requisiti |
| Sistema Operativo | Windows 7/8/8.1 (64 bit) |
| CPU | Intel® Quad Core ™ o Migliore |
| RAM | 8Gb RAM o Migliore |
| Scheda Grafica | NVIDIA GeForce GTX 560 Ti o Migliore * NVIDIA GeForce GTX 660 o Migliore * NVIDIA GeForce GTX 745 o Migliore * |
La Scheda Grafica deve inoltre rispettare dei requisiti aggiuntivi molto importanti
- Only NVIDIA GeForce cards are supported by the system
- The NVIDIA QUADRO line is not supported
- The name scheme for the NVIDIA cards is complex, as specified in this page. To check if a card is better than another, check the 'Core Config' column of the table. A card with less than 300:40:30 cores is not supported. Particular attention has to be given to the appendix of the card name. E.g. the GTX 560 Ti is good enough but the GTX 560M is not.
Scanner Connection
Different models of scanners have different connection requirements; check here the connection that each scanning system needs.
USB 2.0 Scanner with 4 cables
The scanning systems produced before 2015 can be connected to a Computer through 4 cables:
- 2 USB 2.0 Ports that have to be directly connected to the Computer's motherboard (External Hubs are not supported). Every port needs to erogate at least 500mA
- 1 USB 2.0 or 3.0 Port
- 1 HDMI Port
The USB 2.0 system is not 100% compatible with the USB 3.0 system. If this scanner model is connected to a USB 3.0 port, the system may freeze or not properly work.
USB 3.0 Scanner with 2 cables
The 2015's scanning system can be connected to a Computer through only 2 cables:
- 1 USB 3.0 Port that has to be directly connected to the Computer's motherboard. Only Intel C220 or Better and Rensas USB 3.0 are supported. Other USB chipsets could not properly work.
- 1 HDMI Port
