Difference between revisions of "Dental Options Dental"

From Open Tech Dental Wiki 4.0
Jump to: navigation, search
(Aggiornamento a 3.0 (Nuova settagi e nuova gestione esportatori))
Line 8: Line 8:
  
 
<!--T:4-->
 
<!--T:4-->
−
There are 5 sub-categories:
+
There are 2 sub-categories:
  
 
==General== <!--T:2-->
 
==General== <!--T:2-->
Line 16: Line 16:
  
 
<!--T:6-->
 
<!--T:6-->
−
* A project management section with:
+
=== Project Managment ===
−
** '''Scanner Project''' : the path where the software saves all the projects created by the user
 
−
** '''Auto Save''' : if this option is checked, the software will automatically save the project after every main step (Acquisition, Alignment, Mesh Generation)
 
−
** '''Min RI sample number''' : the minimum number of points for an acquisition to be valid. Under the threshold, all the acquisitions will be automatically discarded
 
−
* The Multi-Die Parameters: standard parameters. It is suggested not to modify these parameters but to use the specific multi-die calibration instead.
 
−
* A wizard options section with:
 
−
** '''Check Articulator Alignment''' : if this option is checked, the software will show the result of the alignment with the articulation during the Step-By-Step Wizard
 
−
** '''Show Parallel Mesh Generation''' : if this option is checked, the software will show a function to generate the Meshes during the next scanning step and not at the specific Mesh Generation Step. This function is longer a valid option to speed up the project
 
−
** '''Stumps Manual Cut''' : if this option is checked, the software will show the user an additional Manual Cut step for every stump in the project
 
−
* '''Wizard Auto Cut''', where the auto cut function can be enabled/disabled for every supported element
 
  
−
<!--T:7-->
+
This section let you change how the project information are handled by the software
−
{{Screenshot|Dental_2_5_options_dental_general.jpg}}
+
 
 +
; Scanner Project : the path where the software saves all the projects created by the user
 +
; Implans : the path where the software will search for the implant libraries
 +
; Usa Numeration Type : if this option is checked, the software will use the Universal Tooth Numbering System
 +
; Auto Save : if this option is checked, the software will automatically save the project after every main step (Acquisition, Alignment, Mesh Generation)
 +
; Compressed Projects : if this options is enabled the software will compress the projet data saving up to 70% of the space on the disk. The compressed project can not be loaded by previous version of the software
 +
; Min RI sample number : the minimum number of points for an acquisition to be valid. Under the threshold, all the acquisitions will be automatically discarded
 +
 
 +
=== Multi Die Parameter ===
 +
 
 +
The parameters in this section handle the Multi-Die support. Is suggested not to modify these parameters but to use the specific multi-die calibration instead.
 +
 
 +
=== Wizard Option ===
 +
 
 +
This section let you change the workflow of the Step-By-Step wizard
  
−
==Prosthesis== <!--T:8-->
+
; Check Articulator Alignment : if this option is checked, the software will show the result of the alignment with the articulation during the Step-By-Step Wizard
 +
; Show Parallel Mesh Generation : if this option is checked, the software will show a function to generate the Meshes during the next scanning step and not at the specific Mesh Generation Step. This function is longer a valid option to speed up the project
 +
; Stumps Manual Cut : if this option is checked, the software will show the user an additional Manual Cut step for every stump in the project
  
−
<!--T:9-->
+
=== Wizard Auto Cut ===
−
This page configures how the software integrates with the Exocad CAD Platform or other Prosthesis CAD software. The configurations are:
 
  
−
<!--T:10-->
+
This section let you enable and disable the automatic cut of duplicated surface for the entire Step-By-Step wizard or only for some elements
−
* A Dental CAD section with:
 
−
** '''Implants''' : the path on the disk with all the implant libraries
 
−
** '''DentalCad''' : the Exocad ''DentalCadApp.exe'' path, used by the ''Auto Start Dental Cad'' feature
 
−
** '''Format''' : the format used by the software to export the meshes. For more information, check the [[Man_DataExport#Automatic_Export|Automatic Export]] page
 
−
* A '''Dental Number Settings''' section with an option to use the US (Universal) teeth numbering scheme instead of the default FDI numbering scheme
 
−
* A Final Trasformation section, better explained in the [[Man_DataExport#Final_transformation|Final Transformation]] page
 
−
* Other Options like:
 
−
** '''Auto Start Dental Cad''' : if this option is checked, OpticalRevEng Dental will automatically start the CAD design after a succesful export to the Exocad CAD Platform
 
−
** '''Auto Close''' : if this option is checked, OpticalRevEng Dental will be automatically closed after a succesful export to the Exocad CAD Platform
 
−
** '''Separate Stumps''' : if this option is checked, every stump will be exported as a single file instead of being exported merged together with the rest of the jaw data
 
  
−
<!--T:11-->
+
<!--T:7-->
−
{{Screenshot|Dental_2_5_options_dental_protesis.jpg}}
+
{{Screenshot|Dental_2_5_options_dental_general.jpg}}
  
−
==Orthodontic, Scheletric and Impression== <!--T:12-->
+
== Exporters ==
  
−
<!--T:13-->
+
In this page the user can add, rename, remove [[Man_DataExport#Automatic_Export|exporters profiles]].
−
These three tabs are identical but applied to specific '''Structured Projects'''.<br/>
 
−
There are 2 sections:
 
  
−
<!--T:14-->
+
{{Screenshot|Options-exporters.jpg}}
−
*A Path section with:
 
−
** '''Path''' : the folder where the software will export the data for this specific project. If empty, the data will be exported in the OpticalRevEng Dental Project folder
 
−
** '''Pattern''' : the directory and the file name format used to save the files on the disk. Some special characters starting with ''%'' will be replaced by specific data coming from the project, as shown in the Legend.
 
−
* A Final Trasformation section, better explained in the [[Man_DataExport#Final_transformation|Final Transformation]] page
 
  
−
<!--T:15-->
 
−
{{Screenshot|Dental_2_5_options_dental_ortho.jpg}}
 
 
</translate>
 
</translate>
 
{{Navigation|Dental_Options_Global|Dental_Options_Interactor}}
 
{{Navigation|Dental_Options_Global|Dental_Options_Interactor}}

Revision as of 11:24, 27 November 2015


Dental

This options section provides information on how the Step-By-Step wizard works, how to integrate the software with other CAD systems and how to configure the automatic export system for the structured projects.

There are 2 sub-categories:

General

In the General Page there are:

Project Managment

This section let you change how the project information are handled by the software

Scanner Project 
the path where the software saves all the projects created by the user
Implans 
the path where the software will search for the implant libraries
Usa Numeration Type 
if this option is checked, the software will use the Universal Tooth Numbering System
Auto Save 
if this option is checked, the software will automatically save the project after every main step (Acquisition, Alignment, Mesh Generation)
Compressed Projects 
if this options is enabled the software will compress the projet data saving up to 70% of the space on the disk. The compressed project can not be loaded by previous version of the software
Min RI sample number 
the minimum number of points for an acquisition to be valid. Under the threshold, all the acquisitions will be automatically discarded

Multi Die Parameter

The parameters in this section handle the Multi-Die support. Is suggested not to modify these parameters but to use the specific multi-die calibration instead.

Wizard Option

This section let you change the workflow of the Step-By-Step wizard

Check Articulator Alignment 
if this option is checked, the software will show the result of the alignment with the articulation during the Step-By-Step Wizard
Show Parallel Mesh Generation 
if this option is checked, the software will show a function to generate the Meshes during the next scanning step and not at the specific Mesh Generation Step. This function is longer a valid option to speed up the project
Stumps Manual Cut 
if this option is checked, the software will show the user an additional Manual Cut step for every stump in the project

Wizard Auto Cut

This section let you enable and disable the automatic cut of duplicated surface for the entire Step-By-Step wizard or only for some elements

Dental 2 5 options dental general.jpg

Exporters

In this page the user can add, rename, remove exporters profiles.

Options-exporters.jpg

Dental 2 5 wiz prev.png Homebutton.png Dental 2 5 wiz next.png
Retrieved from "https://wiki.opentechdental.com/w/index.php?title=Dental_Options_Dental&oldid=8019"