Revision as of 09:12, 20 June 2016

附加工具

所有沒有在主工具列中出現的軟體工具都能在這些選單或工具列中找到.

在視圖選單可以選擇顯示或隱藏選單列或其他工具列.

本頁提供了一個所有工具的分類表列,並可連接到各自的特定頁面(如果有的話).

專案工具

這個工具欄能在 檔案選單 或 專案工具列 或 主工具列的專案選單 下找到,它允許用戶創建,編輯,及儲存專案.

新自由專案: 創建一個新的自由專案
結構化專案: 創建一個新的結構化專案
編輯專案: 修改結構化專案
載入專案: 從磁碟載入掃描專案或Exocad專案
儲存專案: 將目前的專案保存在磁碟
新存專案: 將目前的專案儲存在不同的文件夾
開始引導精靈: 開始結構化專案的引導精靈
導出可見: 將視圖上的數據儲存到一個檔案
離開: 關閉軟體

編輯工具

所也在 編輯工具 與 選擇工具列 的按鈕說明細節在資料編輯網頁.

視圖工具

這個工具欄能在 視圖選單, 導航 , 顯示工具列與 3D視圖背景選單內找到.

They allow interaction with the 3D View or to adapt the software interface at the user's needs.

那些沒有在 3D視圖網頁說明的項目是:

Auto-hide Menu: Hides the menu bar when the mouse is far from the top of the window
Toolbars: Submenu that allows hiding/showing the toolbars one by one
View Aligned Implants: If this options is enabled, the Project Tree will show a column with all the implants library aligned for every mesh
Show Marker: If the current mesh is aligned to an implant library, it shows the position of the implant library marker
Show Connection: If the current mesh is aligned to an implant library, it shows the position of the implant library connection interface

顯示工具列

Light: Enables the light system of the 3D View
Color For Face: Switches from a smooth rendering to a flat rendering that shows every single mesh triangle
View Structure: Draws the triangles with a different color to better view the mesh structure
Color Mode: Allows to choose between 3 different color modes

色彩模式

紋理 : 使用物件的原本顏色 (只適用於彩色掃描儀)
指定 : 使用元件的指定顏色,該顏色能在專案樹狀圖的背景選單中更改,這可以對每一個單一物件指定
一致 : 對每一個採集與網個使用同一種顏色. 該色彩模式的選擇是默認的, 該顏色可在選項視窗中改變

採集工具

所有在 採集選單 與 採集工具列 的按鈕說明細節在資料編輯網頁.

這些工具是:

Select Outliers: Allows to select the outlier points
Select Outliers by Angle: allows to select outliers based on an angle
Select Outliers Segmentation: allows to select grups of outliers
Cut Hight: allows to cut unwanted and unnecessary parts of the model using a cursor
Generate Mesh: converts the Range Image in Mesh format

網格工具

所有在網格選單 與 網格工具列 的按鈕說明細節在網格編輯網頁.

這些工具是:

Remove Spikes: Corrects irregularities of the surface
Adv Smoothing: Advanced tool to smooth and sharpen a mesh
Decimate: Reduces the number of triangles of a mesh
Defeature: Removes the details on the selected part of a mesh
Catenate: Creates a single mesh out of the selected individual meshes
Flip normals: Flips the normals of the mesh
Fill All Holes: Fills all the holes of the mesh
Close Denture: Closes the base of the meshed model
Fix Mesh: Detects and fixes the structural issues of a mesh
Mesh Offset: Creates a bigger/smaller version of the selected mesh.

對齊工具

Global Alignment: Tries to recostruct the entire object when the "Range Images" of an acquisition are not well fitted together
Alignment: This button will start the alignment of the currently selected item with the specific reference item

工具

在 工具選單 中提供的通用工具將獨立於目前選定項目且不是用於其他類別

Move Item: Allows to freely move the selected objects in the space
Distance Measure: Allows to measure distances by placing 2 points on the selected 3D objects
Single Acquisition: Allows to launch a single 3D acquisition without moving the object inside the scanner
Open Live: Allows to open the live view of the cameras to see the ongoing scanning process in the pc monitor
Dental To Free: Converts a Structured Project into a Free Project (data will be lost in the process, this can not be reverted)
Options: Opens the Options Dialog
Full Screen: This tool will change the application window to use all the screen space
Service Mode: Enter service mode

資訊

在 ? 選單, 可用以下工具:

Check for Updates: By clicking on this tool, the software will look for any available updated version and prompt to download the last updated version if possible
Ask For Support: This tool will bring on the screen a dialog with the contact details of the technical support
User Info: This tool will show a dialog requiring user's information that will be used by the software's automatic update system to signal errors.
About: A little dialog with some information about this software
Demo Mode: Starts a demo scan procedure that lasts until stopped

有關特定工具的詳細資訊，查看連結網頁

@@ Line 13: / Line 13: @@
 這個工具欄能在 ''檔案選單'' 或 ''專案工具列'' 或 ''主工具列的專案選單'' 下找到,它允許用戶創建,編輯,及儲存專案.
-;{{List button|Dental_2_5_actionNewFreeProject.png}}  新自由專案 : 創建一個新的 [[Free_Mode|自由專案]]
+;{{List button|ActionNewFreeProject.jpg}}   新自由專案 : 創建一個新的 [[Free_Mode|自由專案]]
-;{{List button|Dental_2_5_jobCardButton.png}}        [[Man_ProjectCreation|結構化專案]] : 創建一個新的結構化專案
+;{{List button|ActionNew.jpg}}        [[Man_ProjectCreation|結構化專案]] : 創建一個新的結構化專案
-;{{List button|Dental_2_5_actionEditCommessa.png}}   [[Man_ProjectCreation#Project_Editing|編輯專案]] : 修改結構化專案
+;{{List button|ActionEditCommessa.jpg}}     [[Man_ProjectCreation#Project_Editing|編輯專案]] : 修改結構化專案
-;{{List button|Dental_2_5_actionLoad.png}}           載入專案 : 從磁碟載入掃描專案或Exocad專案
+;{{List button|ActionLoad.jpg}}          載入專案 : 從磁碟載入掃描專案或Exocad專案
-;{{List button|Dental_2_5_actionSave.png}}           儲存專案 : 將目前的專案保存在磁碟
+;{{List button|ActionSave.jpg}}             儲存專案 : 將目前的專案保存在磁碟
-;{{List button|Dental_2_5_actionSaveProjectAs.png}}  新存專案 : 將目前的專案儲存在不同的文件夾
+;{{List button|ActionSaveProjectAs.jpg}}   新存專案 : 將目前的專案儲存在不同的文件夾
-;{{List button|Dental_2_5_actionStartAcqWizard.png}} [[Wiz_Introduction|開始引導精靈]] : 開始結構化專案的引導精靈
+;{{List button|ActionStartAcqWizard.jpg}} [[Wiz_Introduction|開始引導精靈]] : 開始結構化專案的引導精靈
-;{{List button|Dental_2_5_actionExportToCad.png}}    導出可見 : 將視圖上的數據儲存到一個檔案
+;{{List button|ActionExportToCad.jpg}}     導出可見 : 將視圖上的數據儲存到一個檔案
-;{{List button|Dental_2_5_exitButton.png}}           離開 : 關閉軟體
+;{{List button|ActionExit.jpg}}               離開 : 關閉軟體
 == 編輯工具 ==
@@ Line 36: / Line 36: @@
 那些沒有在 [[Interaction|3D視圖]] 網頁說明的項目是:
-;自動隱藏選單 : 當滑鼠遠離視窗頂部時隱藏選單列
+;Auto-hide Menu : Hides the menu bar when the mouse is far from the top of the window
-;工具欄 : 逐一允許隱藏/顯示工具欄的子選單
+;Toolbars : Submenu that allows hiding/showing the toolbars one by one
-;已支援植體視圖 : 如果這個選項是激活的,專案樹狀圖會對每一個網格圖顯示已支援的植體庫表列
+;View Aligned Implants : If this options is enabled, the Project Tree will show a column with all the implants library aligned for every mesh
-;{{List button|Dental_2_5_actionShowMarker.png}} 顯示標記 : 如果植體庫支援目前的網格, 它能顯示植體庫標記的位置
+;{{List button|ActionShowMarker.jpg}} Show Marker : If the current mesh is aligned to an implant library, it shows the position of the implant library marker
-;{{List button|Dental_2_5_actionShowConnection.png}} 顯示連接 : 如果植體庫支援目前的網格, 它能顯示植體庫連接介面的位置
+;{{List button|ActionShowConnection.jpg}} Show Connection : If the current mesh is aligned to an implant library, it shows the position of the implant library connection interface
 === 顯示工具列 ===
-;{{List button|Dental_2_5_actionEnableLight.png}} 光源 : 在3D視圖提供光源系統
+;{{List button|ActionEnableLight.jpg}} Light : Enables the light system of the 3D View
-;{{List button|Dental_2_5_actionColorForFace.png}} 表面顏色 : 將每一個三角網格從圓滑顯視切換到平板顯視
+;{{List button|ActionColorForFace.jpg}} Color For Face : Switches from a smooth rendering to a flat rendering that shows every single mesh triangle
-;{{List button|Dental_2_5_actionViewStructure.png}} 結構視圖 : 在三角形畫上不同顏色以更好顯示網格結構
+;{{List button|ActionViewStructure.jpg}} View Structure : Draws the triangles with a different color to better view the mesh structure
-;{{List button|Dental_2_5_colorModeButton.png}} 色彩模式 : 允許在3種不同的色彩模式間切換
+;{{List button|ActionColorMode.jpg}} Color Mode : Allows to choose between 3 different color modes
 ==== 色彩模式 ====
@@ Line 60: / Line 60: @@
 這些工具是:
-;{{List button|Outlier.png}}       選擇離群值: 允許選擇離群點
+;{{List button|ActionSelectOutliers.jpg}}       Select Outliers: Allows to select the outlier points
-;{{List button|OutliersAngle.png}} 選擇離群角: 允許選擇基於角度的離群值allows to select outliers based on an angle
+;{{List button|ActionSelectOutliersByAngle.jpg}} Select Outliers by Angle: allows to select outliers based on an angle
-;{{List button|OutliersGroup.png}} 選擇離群段: 允許選擇離群段
+;{{List button|ActionSelectOutliersSegmentation.jpg}} Select Outliers Segmentation: allows to select grups of outliers
-;{{List button|CutHeight.png}}     切除高度: 允許用游標切除模型上多餘和部要的部分
+;{{List button|ActionCutHeight.jpg}}     Cut Hight: allows to cut unwanted and unnecessary parts of the model using a cursor
-;{{List button|GenerateMesh.png}}  生成網格: 將範圍影像轉換成網格格式
+;{{List button|ActionGenerateMesh.jpg}}  Generate Mesh: converts the Range Image in Mesh format
 == 網格工具 ==
@@ Line 72: / Line 72: @@
 這些工具是:
-;{{List button|RemoveSpikes.png}}    移除尖端: 修正不平整的表面
+;{{List button|ActionRemoveSpikes.jpg}}    Remove Spikes: Corrects irregularities of the surface
-;{{List button|NormalFilter.png}}    銳化: 銳化平滑網格表面的邊緣
+;{{List button|ActionMeshAdvSmoothing.jpg}}          Adv Smoothing: Advanced tool to smooth and sharpen a mesh
-;{{List button|Smooth.png}}          進階平滑: 進階的網格平滑與銳化工具
+;{{List button|ActionMeshDecimate.jpg}}        Decimate: Reduces the number of triangles of a mesh
-;{{List button|Smooth.png}}          平滑: 平滑網格表面
+;{{List button|ActionMeshDefeature.jpg}}       Defeature:  Removes the details on the selected part of a mesh
-;{{List button|Decimate.png}}        減少: 減少網格的三角形數目
+;{{List button|ActionMeshCatenate.jpg}}        Catenate: Creates a single mesh out of the selected individual meshes
-;{{List button|Defeature.png}}       模糊:  移除選定的部分網格細節
+;{{List button|ActionFlipNormals.jpg}}     Flip normals: Flips the normals of the mesh
-;{{List button|Catenate.png}}        連接: 在選定的個別往格外創建一個單一網格
+;{{List button|ActionMeshFillHoles.jpg}}       Fill All Holes: Fills all the holes of the mesh
-;{{List button|FlipNormals.png}}     翻轉法線: 翻轉網格的法線
+;{{List button|ActionCloseDenturse.jpg}}   Close Denture: Closes the base of the meshed model
-;{{List button|FillHoles.png}}       填補所有洞: 填補網格上所有的孔洞
+;{{List button|ActionMeshDetectIntersec.jpg}}  Fix Mesh: Detects and fixes the structural issues of a mesh
-;{{List button|CloseDenturse.png}}   閉合假牙: 閉合模型網格的底座
+;{{List button|ActionMeshOffset.jpg}}      Mesh Offset: Creates a bigger/smaller version of the selected mesh.
-;{{List button|DetectIntersec.png}}  修復網格: 檢查及修復網格的結構問題
-;{{List button|MeshOffset.png}}      網格偏移: 創建一個更大/更小的網格版本.
 == 對齊工具 ==
-;{{List button|Dental_2_5_actionGlobalAlignment.png}} 全局對齊 : Tries to recostruct the entire object 當採集的 "範圍影像" 沒有很好的配合在一起時,試著重架構全體的物件
+;{{List button|ActionGlobalAlignment.jpg}} Global Alignment : Tries to recostruct the entire object when the "Range Images" of an acquisition are not well fitted together
-;{{List button|Dental 2 5 actionAlignment.png}} [[Man_Align|對齊]] : 這個按鈕將開始對齊目前的選定對象與特定的參考項.
+;{{List button|ActionAlignment.jpg}} [[Man_Align|Alignment]] : This button will start the alignment of the currently selected item with the specific reference item
 == 工具 ==
@@ Line 97: / Line 95: @@
 ;{{List button|ActionDistanceMeasure.jpg}} Distance Measure : Allows to measure distances by placing 2 points on the selected 3D objects
 ;{{List button|ActionSingleAcquisition.jpg}} [[Man_Acquisition|Single Acquisition]] : Allows to launch a single 3D acquisition without moving the object inside the scanner
-;{{List button|LiveButton.jpg}}: Allows to open the live view of the cameras to see the ongoing scanning process in the pc monitor
+;{{List button|LiveButton.jpg}} Open Live: Allows to open the live view of the cameras to see the ongoing scanning process in the pc monitor
 ;[[Free_Mode|Dental To Free]] : Converts a Structured Project into a Free Project (data will be lost in the process, this can not be reverted)
 ;{{List button|ActionOptions.jpg}}  [[Dental_Options|Options]] : Opens the Options Dialog

Difference between revisions of "Support Toolbars And Menus/zh-hant"

Revision as of 09:12, 20 June 2016

Contents

附加工具

專案工具

編輯工具

視圖工具

顯示工具列

色彩模式

採集工具

網格工具

對齊工具

工具

資訊

Navigation menu

Personal tools

Namespaces

Variants

Views

More

Search

Navigation

Tools

In other languages

Print/export