Difference between revisions of "Dental Options Dental"

From Open Tech Dental Wiki 4.0
Jump to: navigation, search
Line 5: Line 5:
  
 
<!--T:3-->
 
<!--T:3-->
−
This options section provides information on how the Step-By-Step wizard works, how to integrate with other CAD systems and how to configure the automatic export system for the '''structurated projects'''.
+
This options section provides information on how the Step-By-Step wizard works, how to integrate the software with other CAD systems and how to configure the automatic export system for the '''structurated projects'''.
  
 
<!--T:4-->
 
<!--T:4-->
Line 16: Line 16:
  
 
<!--T:6-->
 
<!--T:6-->
−
* A project managment section with:
+
* A project management section with:
−
** '''Scanner Project''' : The path where the software saves all the project created by the user
+
** '''Scanner Project''' : the path where the software saves all the project created by the user
−
** '''Auto Save''' : If checked the software will save automatically after every main step in the project (Acquisition, Alignment, Mesh Generation)
+
** '''Auto Save''' : if this option is checked, the software will automatically save the project after every main step (Acquisition, Alignment, Mesh Generation)
−
** '''Min RI sample number''' : The minimum number of points valid for an acquisition. All the acquisitions that have less points will be automatically discarted.
+
** '''Min RI sample number''' : the minimum number of points valid for an acquisition. All the acquisitions that have less points will be automatically discarded
−
* The Multi-Die Parameters: The best way to handle the multi-die parameters is to use the specific automatic calibration
+
* The Multi-Die Parameters: the best way to handle the multi-die parameters is to use the specific automatic calibration
−
* A wizard options section with :
+
* A wizard options section with:
−
** '''Check Articulator Alignment''' : If checked the software will show the result of the alignment with the articulation during the Step-By-Step Wizard
+
** '''Check Articulator Alignment''' : if this option is checked, the software will show the result of the alignment with the articulation during the Step-By-Step Wizard
−
** '''ShowParallel Mesh Generation''' : If checked the software will show the user an old function that tried to speed-up the Step-By-Step Wizard generating the Meshes as soon as possible and not at the specific Mesh Generation Step
+
** '''Show Parallel Mesh Generation''' : if this option is checked, the software will show the user an old function that tried to speed-up the Step-By-Step Wizard generating the Meshes as soon as possible and not at the specific Mesh Generation Step
−
** '''Sumps Manual Cut''' : If checked the software will show the user an additional Manual Cut step for every stump in the project
+
** '''Stumps Manual Cut''' : if this option is checked, the software will show the user an additional Manual Cut step for every stump in the project
−
* '''A Wizard Auto Cut''' where the auto cut function can be enabled/disabled for every supported element.
+
* '''A Wizard Auto Cut''' where the auto cut function can be enabled/disabled for every supported element
  
 
<!--T:7-->
 
<!--T:7-->
 
[[File:Dental_2_5_options_dental_general.jpg|center]]
 
[[File:Dental_2_5_options_dental_general.jpg|center]]
  
−
==Protesis== <!--T:8-->
+
==Prosthesis== <!--T:8-->
  
 
<!--T:9-->
 
<!--T:9-->
−
This page configures how the software integrates with the Exocad CAD Platform or other Protesis CAD softwares. The configurations are:
+
This page configures how the software integrates with the Exocad CAD Platform or other Prosthesis CAD software. The configurations are:
  
 
<!--T:10-->
 
<!--T:10-->
−
* A Dental Cad section with:
+
* A Dental CAD section with:
−
** '''Implants''' : The path on the disc with all the implant libraries
+
** '''Implants''' : the path on the disk with all the implant libraries
−
** '''DentalCad''' : The Exocad ''DentalCadApp.exe'' path, used by the ''Auto Start Dental Cad'' feature
+
** '''DentalCad''' : the Exocad ''DentalCadApp.exe'' path, used by the ''Auto Start Dental Cad'' feature
−
** '''Format''' : The format used by the software to export the meshes. You can read more in the [[Man_DataExport#Automatic_Export|Automatic Export]] page
+
** '''Format''' : the format used by the software to export the meshes. You can read more in the [[Man_DataExport#Automatic_Export|Automatic Export]] page
−
* A '''Dental Number Settings''' section with an option to use the US (Universal) tooth numbering scheme instead of the default FDI numbering scheme
+
* A '''Dental Number Settings''' section with an option to use the US (Universal) teeth numbering scheme instead of the default FDI numbering scheme
−
* A Final Trasformation section better explained in the [[Man_DataExport#Final_transformation|Final Transormation]] page
+
* A Final Trasformation section, better explained in the [[Man_DataExport#Final_transformation|Final Transformation]] page
−
* Others Options like:
+
* Other Options like:
−
** '''Auto Start Dental Cad''' : If enabled OpticalRevEng Dental will automatically start the CAD design after a succesfull export to the Exocad CAD Platform
+
** '''Auto Start Dental Cad''' : if this option is checked, OpticalRevEng Dental will automatically start the CAD design after a succesful export to the Exocad CAD Platform
−
** '''Auto Close''' : If enabled OpticalRevEng Dental will close automatically after a succesfull export to the Exocad CAD Platform
+
** '''Auto Close''' : if this option is checked, OpticalRevEng Dental will be automatically closed after a succesful export to the Exocad CAD Platform
−
** '''Separate Stumps''' : If enabled every stump will be exported as individual files instead of being exported merged togheter with the rest of the jaw data
+
** '''Separate Stumps''' : if this option is checked, every stump will be exported as a single file instead of being exported merged together with the rest of the jaw data
  
 
<!--T:11-->
 
<!--T:11-->
Line 58: Line 58:
 
<!--T:14-->
 
<!--T:14-->
 
*A Path section with:
 
*A Path section with:
−
** '''Path''' : The folder where the software will export the data for this specific project. If empty the data will be exported in the OpticalRevEng Dental Project folder
+
** '''Path''' : the folder where the software will export the data for this specific project. If empty, the data will be exported in the OpticalRevEng Dental Project folder
−
** '''Pattern''' : The directory and file name format used to save the files on disk. Some special characters starting with ''%'' will be replaced by specific data coming from the project as showed in the Legend.
+
** '''Pattern''' : the directory and the file name format used to save the files on the disk. Some special characters starting with ''%'' will be replaced by specific data coming from the project, as shown in the Legend.
−
* A Final Trasformation section better explained in the [[Man_DataExport#Final_transformation|Final Transormation]] page
+
* A Final Trasformation section, better explained in the [[Man_DataExport#Final_transformation|Final Transformation]] page
  
 
<!--T:15-->
 
<!--T:15-->
 
[[File:Dental_2_5_options_dental_ortho.jpg|center]]
 
[[File:Dental_2_5_options_dental_ortho.jpg|center]]
 
</translate>
 
</translate>

Revision as of 11:03, 2 September 2015

Other languages:
العربية • ‎Deutsch • ‎English • ‎español • ‎français • ‎italiano • ‎日本語 • ‎português do Brasil • ‎română • ‎русский • ‎Türkçe • ‎中文（繁體）‎

Dental

This options section provides information on how the Step-By-Step wizard works, how to integrate the software with other CAD systems and how to configure the automatic export system for the structurated projects.

There are 5 sub-categories:

General

In the General Page there are:

  • A project management section with:
    • Scanner Project : the path where the software saves all the project created by the user
    • Auto Save : if this option is checked, the software will automatically save the project after every main step (Acquisition, Alignment, Mesh Generation)
    • Min RI sample number : the minimum number of points valid for an acquisition. All the acquisitions that have less points will be automatically discarded
  • The Multi-Die Parameters: the best way to handle the multi-die parameters is to use the specific automatic calibration
  • A wizard options section with:
    • Check Articulator Alignment : if this option is checked, the software will show the result of the alignment with the articulation during the Step-By-Step Wizard
    • Show Parallel Mesh Generation : if this option is checked, the software will show the user an old function that tried to speed-up the Step-By-Step Wizard generating the Meshes as soon as possible and not at the specific Mesh Generation Step
    • Stumps Manual Cut : if this option is checked, the software will show the user an additional Manual Cut step for every stump in the project
  • A Wizard Auto Cut where the auto cut function can be enabled/disabled for every supported element
Dental 2 5 options dental general.jpg

Prosthesis

This page configures how the software integrates with the Exocad CAD Platform or other Prosthesis CAD software. The configurations are:

  • A Dental CAD section with:
    • Implants : the path on the disk with all the implant libraries
    • DentalCad : the Exocad DentalCadApp.exe path, used by the Auto Start Dental Cad feature
    • Format : the format used by the software to export the meshes. You can read more in the Automatic Export page
  • A Dental Number Settings section with an option to use the US (Universal) teeth numbering scheme instead of the default FDI numbering scheme
  • A Final Trasformation section, better explained in the Final Transformation page
  • Other Options like:
    • Auto Start Dental Cad : if this option is checked, OpticalRevEng Dental will automatically start the CAD design after a succesful export to the Exocad CAD Platform
    • Auto Close : if this option is checked, OpticalRevEng Dental will be automatically closed after a succesful export to the Exocad CAD Platform
    • Separate Stumps : if this option is checked, every stump will be exported as a single file instead of being exported merged together with the rest of the jaw data
Dental 2 5 options dental protesis.jpg

Orthodontic, Scheletric and Impression

This three pages share the same function but are applied to specific Structurated Projects.
There are 2 sections:

  • A Path section with:
    • Path : the folder where the software will export the data for this specific project. If empty, the data will be exported in the OpticalRevEng Dental Project folder
    • Pattern : the directory and the file name format used to save the files on the disk. Some special characters starting with % will be replaced by specific data coming from the project, as shown in the Legend.
  • A Final Trasformation section, better explained in the Final Transformation page
Dental 2 5 options dental ortho.jpg
Retrieved from "https://wiki.opentechdental.com/w/index.php?title=Dental_Options_Dental&oldid=1663"