View source for Dental Service Tools/pt-br

{{Language bar}}
{{DISPLAYTITLE:Dental Service Mode|noerror}}
__TOC__

OpticalRevEng Dental offers a Service Mode, that can be opened from the [[Support_Toolbars_And_Menus#Tools|Tools Menu]], to recalibrate and diagnose any issue that might occur.

{{Screenshot|Service-mode.jpg}}

== Live Mode ==

With this tool it is possible to check the live view of the scanner's cameras.

To start this tool click on the {{Inline button|ActionLiveCameraParams.svg}} button;

== Check Scanner ==

The software checks if the scanner connection is in order every time it is activated. 

With this tool {{Inline button|actionCheckScannerHardware.svg}}it is possible to run this check manually.

== Recalibrate Head==

To launch this tool, click on the {{Inline button|actionRecalibrateHead.svg}} button;

There are 2 types of calibration:
; Recalibration : Fast procedure to update scanner's calibration periodically or to be performed if the scanner is moved to any other location
; Full Calibration : More complex procedure to be performed after a mechanical repair

Esta ferramenta utiliza o  [[Acessórios|Kit de Calibração]] para realizar uma nova calibração da cabeça óptica do scanner. O procedimento é o seguinte:

#Put the calibration kit inside the scanner in the correct position
#Select the calibration type from the drop-down menu
#In the calibration dialog, select from the drop down menu the exact calibration kit name
#Click '''Start'''

Se o nome do kit de calibração não está disponível no sub-menu , o botão '''Carregar Novo Master Xml'''pode ser usado para adicionar um novo kit de calibração a partir do arquivo de descrição XML apropriado.

{{Small image|Calib-dlg.jpg}}

The calibration procedure is automatic. Once finished, the software will show one of the following messages:

*'Scanner Already Calibrated' : the calibration is not necessary
*'Scanner Recalibrated Successfully' : the calibration has been completed
*'Scanner Recalibration Failed' : calibration has to be repeated 

If the calibration was successful, the '''Axes Calibration''' starts automatically.

==Recalibração dos Eixos==

Esta ferramenta é usada para verificar o sistema de movimento do escaner. O escaner irá digitalizar um objeto, analisá-lo, e usar esses dados para calibrar o sistema de movimento.

This tool will start automatically after a '''Head Recalibration''' or can be started manually with the {{Inline button|actionDirectAxesCalib.svg}} button.

{{Important|When the '''Dynamic Articulation Module''' is enabled, calibrate the axis with the specific [[Accessories|Axis Calibration Object]]. From that moment on, any recalibration needs to be performed with the same object. Otherwise, axis recalibration will fail.}}

# Put the calibration object inside the scanner
# Click '''Recalibrate Axis'''
# Click '''Ok''' when prompted

O procedimento de calibração é automática. Uma vez que é terminado, o software irá mostrar uma das seguintes mensagens:

*'Axis Recalibration Successfull' : the calibration has been completed
*'Axis Recalibration Failed' : calibration has to be repeated 

==Parâmetros Auto Ajuste Multi-Munhão ==

Esta ferramenta é usada para calibrar o suporte Multi-Munhão. Se as aquisições realizadas com o Multi-Munhão não são reconhecidas corretamente, o procedimento de calibração é o seguinte:

# Clean the multi-die from excessive material or white powder, every single die position needs to be clearly separated from the others
# Put the empty multi-die support inside the scanner
# Start the tool with this button {{Inline button|ActionAutoSetUpMultiDieParameters.svg }} 
# Click '''Ok''' when prompted

==Aquisição de Diagnóstico==

When doubting the proper functioning of the scanner, this tool carries out a specific acquisition of the object currently inside the scanner.

The software then saves all the information in a "*.diag" file that can be sent to the OpticalRevEng Dental support to diagnose possible issues.

To start this tool click the {{Inline button|actionDiagnosticAcquisition.svg}} button.

{{Navigation|Dental_Options_Interactor|Main Page}}