Concept Quad Module
Contents
Module Concept Quad
Ce module, lorsqu'il est activé dans la licence, permet de numériser un projet sur les modèles de type quadrant en seulement deux étapes. La procédure de travail est très simple, complètement automatique et entièrement assistée,
Démarrer de OpticalRevEng Dental
Pour numériser un projet à l'aide du module Concept Quad directement à partir du logiciel de numérisation, accéder au Gestionnaire de Projet et créer ce type de projet:
Rappelez-vous simplement de sélectionner le Modèle Quadrant dans le menu déroulant Type de modèle et accepter avec le bouton vert.
Starting From Exocad
It is possible to use this type of scan wizard starting from Exocad as well. Just define the project as usual in Exocad's Dental DB.
Save the project and click on the scan button. This will launch the Scan Software's Guided Procedure.
In the splash screen select Advanced Import Options and, in the Model Type drop down menu, Quandrant Model.
Accept your choice clicking on the start button, and the software will present the scan wizard for the Concept Quad Module.
Scan Procedure
The first scan the software requires is the occlusion. Differently from the other articulators strategies, the Concept Quad takes 6 images of the occlusion with a low tilting.
It is possible to just place the models on the plate facing the cameras, making sure they are stable enough and that they won't move during the scan.
The software will present a step for editing the articulation image, and will afterwards require to scan the individual elements on the Concept Quad Model Holder, describing how to position the elements.
Once this scan is performed, the elements have been all sucessufully acquired, and the user doesn't need to scan furtherly.
Follows a step to cut the height of the model, after which the individual elements will be aligned to the articulation image.
At this point the project is ready to be meshed, still the software offers the chance to edit the images or to manually check all the individual elements just by clicking on Manual Check.
If the user thinks there is no need to check the elements, simply by clicking Next the scans will be meshed and ready to be exported.
