Difference between revisions of "Wiz ConceptQuad/es"

From Open Tech Dental Wiki 4.0
Jump to: navigation, search
(Created page with "Si habilitado en la licencia, este módulo permite escanear un proyecto con modelos de emiarcada en tán solo dos pasos. El asistente es realmente fácil por seguir, completam...")
(Created page with "==Empezando de OpticalRevEng Dental==")
Line 6: Line 6:
 
Si habilitado en la licencia, este módulo permite escanear un proyecto con modelos de emiarcada en tán solo dos pasos. El asistente es realmente fácil por seguir, completamente automático y guiado.
 
Si habilitado en la licencia, este módulo permite escanear un proyecto con modelos de emiarcada en tán solo dos pasos. El asistente es realmente fácil por seguir, completamente automático y guiado.
  
== Starting from OpticalRevEng Dental ==
+
==Empezando de OpticalRevEng Dental==
  
 
To scan a project using the Concept Quad Module directly from the scanning Software, access the Project Manager and create this type of project:
 
To scan a project using the Concept Quad Module directly from the scanning Software, access the Project Manager and create this type of project:

Revision as of 16:18, 23 June 2016


Módulo Concept Quad

Si habilitado en la licencia, este módulo permite escanear un proyecto con modelos de emiarcada en tán solo dos pasos. El asistente es realmente fácil por seguir, completamente automático y guiado.

Empezando de OpticalRevEng Dental

To scan a project using the Concept Quad Module directly from the scanning Software, access the Project Manager and create this type of project:

ProjectManagerQ.PNG

Just remeber to select the Quandrant Model in the drop down menu Model Type and accept with the green button.

Starting From Exocad

It is possible to use this type of scan wizard starting from Exocad as well. Just define the project as usual in Exocad's Dental DB.

ProjExo.PNG

Save the project and click on the scan button. This will launch the Scan Software's Guided Procedure.

In the splash screen select Advanced Import Options and, in the Model Type drop down menu, Quandrant Model.

SplashExoQ.PNG

Accept your choice clicking on the start button, and the software will present the scan wizard for the Concept Quad Module.

Scan Procedure

The first scan the software requires is the occlusion. Differently from the other articulators strategies, the Concept Quad takes 6 images of the occlusion with a low tilting.

It is possible to just place the models on the plate facing the cameras, making sure they are stable enough and that they won't move during the scan.

Arti.PNG

The software will present a step for editing the articulation image, and will afterwards require to scan the individual elements on the Concept Quad Model Holder, describing how to position the elements.

Quadr.PNG

Once this scan is performed, the elements have been all sucessufully acquired, and the user doesn't need to scan furtherly.

Follows a step to cut the height of the model, after which the individual elements will be aligned to the articulation image.

Scancheck.PNG

At this point the project is ready to be meshed, still the software offers the chance to edit the images or to manually check all the individual elements just by clicking on Manual Check.

If the user thinks there is no need to check the elements, simply by clicking Next the scans will be meshed and ready to be exported.

ExportQ.PNG


Dental 2 5 wiz prev.png Homebutton.png Dental 2 5 wiz next.png