Difference between revisions of "Pc Min Requirements/ja"

From Open Tech Dental Wiki 4.0
Jump to: navigation, search
(Created page with "# Alienware X51 R2 (Intel i5搭載):イージーおよびスマートスキャナー用 # Alienware X51 R2 (Intel i7搭載):デラックススキャナー用")
(Created page with "== 最小要件 ==")
Line 10: Line 10:
 
# Alienware X51 R2 (Intel i7搭載):デラックススキャナー用
 
# Alienware X51 R2 (Intel i7搭載):デラックススキャナー用
  
== Minimum Requirements ==
+
== 最小要件 ==
  
 
=== Software ===
 
=== Software ===

Revision as of 08:52, 26 December 2015


推奨されるシステム

スキャナーに接続するコンピュータには、特定の要件が必要となります。

選択に迷った場合は、以下の参照システム(Dell製)を推奨します。

  1. Alienware X51 R2 (Intel i5搭載):イージーおよびスマートスキャナー用
  2. Alienware X51 R2 (Intel i7搭載):デラックススキャナー用

最小要件

Software

These are the minimum requirements our software needs:

Component Requirement
Operating System Windows 7/8/8.1 (64 bit)
CPU Intel® Quad Core ™ or Better
RAM 8Gb RAM or Better
Video Card NVIDIA GeForce GTX 560 Ti or Better *
NVIDIA GeForce GTX 660 or Better *
NVIDIA GeForce GTX 745 or Better *

The Video Card has important additional requirements:

  • Only NVIDIA GeForce cards are supported by the system
  • The NVIDIA QUADRO line is not supported
  • The name scheme for the NVIDIA cards is complex, as specified in this page. To check if a card is better than another, check the 'Core Config' column of the table. A card with less than 300:40:30 cores is not supported. Particular attention has to be given to the appendix of the card name. E.g. the GTX 560 Ti is good enough but the GTX 560M is not.

Scanner Connection

Different models of scanners have different connection requirements; check here the connection that each scanning system needs.

USB 2.0 Scanner with 4 cables

The scanning systems produced before 2015 can be connected to a Computer through 4 cables:

  • 2 USB 2.0 Ports that have to be directly connected to the Computer's motherboard (External Hubs are not supported). Every port needs to supply at least 500mA
  • 1 USB 2.0 or 3.0 Port
  • 1 HDMI Port

The USB 2.0 system is not 100% compatible with the USB 3.0 system. If this scanner model is connected to a USB 3.0 port, the system may freeze or not properly work.

USB 3.0 Scanner with 2 cables

The 2015's scanning system can be connected to a Computer through only 2 cables:

  • 1 USB 3.0 Port that has to be directly connected to the Computer's motherboard. Only Intel C220 or Better and Rensas USB 3.0 are supported. Other USB chipsets could not properly work.
  • 1 HDMI Port