Difference between revisions of "Pc Min Requirements/it"

From Open Tech Dental Wiki 4.0
Jump to: navigation, search
Line 10: Line 10:
 
# Alienware X51 R2 (with Intel i7) per gli Scanner Deluxe
 
# Alienware X51 R2 (with Intel i7) per gli Scanner Deluxe
  
== Minimum Requirements ==
+
==Requisiti Minimi==
  
 
=== Software ===
 
=== Software ===

Revision as of 09:31, 11 September 2015


Sistemi Consigliati

I Computer che vengono connessi ai nostri scanner devono rispettare dei requisiti minimi specifici.

Per semplificare la scelta, come riferimento, consigliamo due sistemi DELL:

  1. Alienware X51 R2 (with Intel i5) per i modelli Easy e Smart
  2. Alienware X51 R2 (with Intel i7) per gli Scanner Deluxe

Requisiti Minimi

Software

Questi sono i requisiti minimi necessari per il funzionamento del nostro Software:

Componente Requisiti
Sistema Operativo Windows 7/8/8.1 (64 bit)
CPU Intel® Quad Core ™ o Migliore
RAM 8Gb RAM o Migliore
Scheda Grafica NVIDIA GeForce GTX 560 Ti o Migliore *
NVIDIA GeForce GTX 660 o Migliore *
NVIDIA GeForce GTX 745 o Migliore *

The Video Card has important additional requirements:

  • Only NVIDIA GeForce cards are supported by the system
  • The NVIDIA QUADRO line is not supported
  • The name scheme for the NVIDIA cards is complex, as specified in this page. To check if a card is better than another, check the 'Core Config' column of the table. A card with less than 300:40:30 cores is not supported. Particular attention has to be given to the appendix of the card name. E.g. the GTX 560 Ti is good enough but the GTX 560M is not.

Connessione dello Scanner

Different models of scanners have different connection requirements; check here the connection that each scanning system needs.

USB 2.0 Scanner with 4 cables

The scanning systems produced before 2015 can be connected to a Computer through 4 cables:

  • 2 USB 2.0 Ports that have to be directly connected to the Computer's motherboard (External Hubs are not supported). Every port needs to erogate at least 500mA
  • 1 USB 2.0 or 3.0 Port
  • 1 HDMI Port

The USB 2.0 system is not 100% compatible with the USB 3.0 system. If this scanner model is connected to a USB 3.0 port, the system may freeze or not properly work.

USB 3.0 Scanner with 2 cables

Il sistema di scansione del 2015 si collega al Computer utilizzando solo 2 cavi connessi a:

  • 1 USB 3.0 Port that has to be directly connected to the Computer's motherboard. Only Intel C220 or Better and Rensas USB 3.0 are supported. Other USB chipsets could not properly work.
  • 1 HDMI Port