Pc Minimum Requirements

From Open Tech Dental Wiki 4.0
Revision as of 09:21, 25 December 2015 by A.derrico (talk | contribs) (Created page with "La Tarjeta Gráfica tiene requisitos adicionales fundamentales:")
Jump to: navigation, search


Sistemas aconsejados

Los Ordenadores que se conectan a nuestro escáner deben respectar algunos requisitos mínimos específicos.

Para simplificar la elección, como referencia, aconsejamos dos sistemas DELL.

  1. Alienware X51 R2 (con Intel i5) para los modelos Easy y Smart
  2. Alienware X51 R2 (con Intel i7) para los modelos Deluxe

Requisitos Mínimos

Software

Estos son los requisitos mínimos necesarios para el funcionamiento de nuestro Software:

Componente Requisitos
Sistema Operativo Windows 7/8/8.1 (64 bit)
CPU Intel® Quad Core ™ o Mejor
RAM 8Gb RAM o Mejor
Tarjeta Gráfica NVIDIA GeForce GTX 560 Ti o Mejor *
NVIDIA GeForce GTX 660 o Mejor *
NVIDIA GeForce GTX 745 o Mejor *

La Tarjeta Gráfica tiene requisitos adicionales fundamentales:

  • Only NVIDIA GeForce cards are supported by the system
  • The NVIDIA QUADRO line is not supported
  • The name scheme for the NVIDIA cards is complex, as specified in this page. To check if a card is better than another, check the 'Core Config' column of the table. A card with less than 300:40:30 cores is not supported. Particular attention has to be given to the appendix of the card name. E.g. the GTX 560 Ti is good enough but the GTX 560M is not.

Scanner Connection

Different models of scanners have different connection requirements; check here the connection that each scanning system needs.

USB 2.0 Scanner with 4 cables

The scanning systems produced before 2015 can be connected to a Computer through 4 cables:

  • 2 USB 2.0 Ports that have to be directly connected to the Computer's motherboard (External Hubs are not supported). Every port needs to supply at least 500mA
  • 1 USB 2.0 or 3.0 Port
  • 1 HDMI Port

The USB 2.0 system is not 100% compatible with the USB 3.0 system. If this scanner model is connected to a USB 3.0 port, the system may freeze or not properly work.

USB 3.0 Scanner with 2 cables

The 2015's scanning system can be connected to a Computer through only 2 cables:

  • 1 USB 3.0 Port that has to be directly connected to the Computer's motherboard. Only Intel C220 or Better and Rensas USB 3.0 are supported. Other USB chipsets could not properly work.
  • 1 HDMI Port