Scanner's connection

From Open Tech Dental Wiki 4.0
Revision as of 07:16, 18 January 2016 by Democenter (talk | contribs) (Created page with "''掃描儀接口 (Small)''")
Jump to: navigation, search


連接掃描儀

正如你所看到下面的圖片, 在掃描儀的背面自左至右為 ; 電源開關 , 電源線接口 , HDMI 接口和 USB 接口:

Big.png

掃描儀接口 (Big/Deluxe)

Small.png

掃描儀接口 (Small)

The power cable is an average 230V cable and must be connected to a power line that can hold such voltage in all phases of work and that is protected from overloads and short-circuits.
The HDMI cable must be connected to the Computer, in the Graphic Card's HDMI port. The location of this port in the computer may vary according to the Computer's brand and model. In the Computers we provide, Dell's Alienware i5 and i7, this HDMI port is on the bottom-left side:

Pc.png

The connection of the USB cable depends on the model of the scanner, as in the Easy and Smart models (both Small and Big) there are USB 2.0 components, whereas in the Deluxe model there are USB 3.0 components. Therefore, the USB cable of Easy and Smart Scanners must be plugged in a port USB 2.0 and the USB cable of the Deluxe model must be connected to a port USB 3.0. These ports are usually colour-coded, so it's possible to recognise the 2.0 because of its black colour and the 3.0 because of its blue colour. The USB cable that Open Technologies provides to connect the scanner to the Computer is a 3.0 USB cable (blue), however the above-mentioned instructions remain valid and even though the cable is 3.0, if the scanner is an Easy or Smart model it must be plugged in a USB 2.0.