Difference between revisions of "OpticalRevEngDental/es"

From Open Tech Dental Wiki 4.0
Jump to: navigation, search
(Created page with "OpticalRevEng Dental es el software que permite crear y modificar las Imágenes de Profundidad obtenidas por los escáneres Dentales Open Technologies.")
(Created page with "La aplicación ha sido proyectada para efectuar las siguientes operaciones:")
Line 3: Line 3:
 
OpticalRevEng Dental es el software que permite crear y modificar las Imágenes de Profundidad obtenidas por los escáneres Dentales Open Technologies.
 
OpticalRevEng Dental es el software que permite crear y modificar las Imágenes de Profundidad obtenidas por los escáneres Dentales Open Technologies.
  
The application has been designed to perform the following operations:
+
La aplicación ha sido proyectada para efectuar las siguientes operaciones:
  
 
# '''3D optical scanning''': the generation of "Range Images" of the scanned object.
 
# '''3D optical scanning''': the generation of "Range Images" of the scanned object.

Revision as of 08:49, 26 December 2015

Warning: Display title "OpticalRevEng Dental" overrides earlier display title "OpticalRevEngDental". OpticalRevEng Dental es el software que permite crear y modificar las Imágenes de Profundidad obtenidas por los escáneres Dentales Open Technologies.

La aplicación ha sido proyectada para efectuar las siguientes operaciones:

  1. 3D optical scanning: the generation of "Range Images" of the scanned object.
  2. Alignment of the range images: the group of functions that allow to integrate the scanning of different objects, or portions of objects, in order to accurately replicate their mutual position.
  3. Cleaning of the range images: tools that allow to delete the undesired scattered points that can be generated during scanning.
  4. Generation of triangle meshes: the group of procedures and algorithms that can transform the range images, acquired from the scanner, into triangle meshes that can be used with other CAD/CAM systems.
  5. Editing the meshes: tools for the elaboration of the meshes; (E.g. smoothing, hole filling, etc.)

All information is logically organized within a Project. The scanning data addition or modification always takes place inside a Project, that can be saved or loaded from the disk.

The software supports two different kinds of projects:

  • Free Projects: every element is independent from the other and the user can organise the logic of the project.
  • Structured Projects: the elements are organised according to a Job Definition, established by the user or imported from another software.

Most of the considerations in this manual are valid for both project types.

Dental 2 5 wiz prev.png Homebutton.png Dental 2 5 wiz next.png