Latest revision as of 14:30, 29 August 2016

Dental

This options section provides information on how the Step-By-Step wizard works, how to integrate the software with other CAD systems and how to configure the automatic export system for the structured projects.

There are 3 sub-categories:

Geral

Na página Geral existem:

Project Managment

This section allows to change the way the software handles the information

Dental Projects: the path where the software saves all the projects created by the user
External Projects: the path where the software saves the scan data, if the user doesn't want to save it in the Exocad Project Folder.
Implants: the path where the software will search for the implant libraries
Usa Numeration Type: if this option is checked, the software will use the Universal Tooth Numbering System
Auto Save: if this option is checked, the software will automatically save the project after every main step (Acquisition, Alignment, Mesh Generation)
Compressed Projects: if this option is enabled, the software will compress the projet data saving up to 70% of the space on the disk. The compressed project can not be loaded by previous versions of the software
Min RI sample number: the minimum number of points for an acquisition to be considered valid. Under the established threshold, all the acquisitions will be automatically discarded

Multi Die Parameter

The parameters in this section are specific to the Multi-Die support. It is suggested not to modify these parameters but to use the specific multi-die calibration instead.

Wizard

Wizard Option

This section allows to change the workflow of the Step-By-Step wizard

Check Articulator Alignment: if this option is checked, the software will show the result of the alignment with the articulation during the Step-By-Step Wizard
Show Parallel Mesh Generation: if this option is checked, the software will show a function to generate the Meshes during the next scanning step and not at the specific Mesh Generation Step. This function is longer a valid option to speed up the project
Stumps Manual Cut: if this option is checked, the software will show the user an additional Manual Cut step for every stump in the project
Auto Export to Cad: automatically exports the generated STL file to the connected CAD
Skip Opt Implant Library Alignment: allows to skip the library alingment step to aling the markers to the library in another software

Wizard Auto Cut

This section allows to enable and disable the automatic cut of duplicated surface for the entire Step-By-Step wizard or only for some elements

@@ Line 1: / Line 1: @@
-<languages/>
+{{Language bar}}
-{{DISPLAYTITLE:Dental Options}}
+{{DISPLAYTITLE:Dental Options|noerror}}
 =Dental=
-Esta seção de opções fornece informações sobre como o assistente passo-a-passo funciona, como integrar o software com outros sistemas CAD e como configurar o sistema de exportação automática para os '' 'projetos estruturados' ''
+This options section provides information on how the Step-By-Step wizard works, how to integrate the software with other CAD systems and how to configure the automatic export system for the '''structured projects'''.
-Existem 5 subcategorias:
+There are 3 sub-categories:
 ==Geral==
@@ Line 11: / Line 11: @@
 Na página Geral existem:
-* A seção de gerenciamento de projetos com:
+=== Project Managment ===
-** '''Projeto Escaner''' : o trajeto onde o software salva todo o projeto criado pelo usuário
-** '''Salvamento Automático''' : Se esta opção estiver marcada, o software irá automaticamente salvar o projeto após cada etapa principal (Aquisição, Alinhamento, Mesh Generation)
-** '''Min RI número da amostra''' : o número mínimo de pontos válidos para uma aquisição. Todas as aquisições que têm menos pontos serão automaticamente descartadas.
-* Multi-Die Parametros: a melhor forma de lidar com os parâmetros multi-die é usar a calibragem automática específica
-* A seção de opções do assistente com:
-** '''Verifique Alinhamento do Articulador ''' : Se esta opção estiver marcada, o software irá mostrar o resultado do alinhamento com a articulação durante o Passo a Passo do Assistente
-** '''Mostra Geração de malhas paralela  ''' : Se esta opção estiver marcada, o software irá mostrar ao usuário uma antiga função  que tentou acelerar o passo-a-passo do assistente gerando as malhas mais rapidamente possível e não no específico passo de geração de malha
-** '''Corte manual de munhões''' : Se esta opção estiver marcada, o software irá mostrar ao usuário uma etapa adicional de corte manual para cada munhão no projeto
-* '''Auto Corte do Assistente''' onde a função de corte automático pode ser ativada / desativada para cada elemento suportado
-[[Arquivo:Dental_2_5_opções_dental_geral.jpg|centro]]
+This section allows to change the way the software handles the information
-==Prótese==
+; Dental Projects : the path where the software saves all the projects created by the user
+; External Projects: the path where the software saves the scan data, if the user doesn't want to save it in the Exocad Project Folder.
+; Implants : the path where the software will search for the implant libraries
+; Usa Numeration Type : if this option is checked, the software will use the Universal Tooth Numbering System
+; Auto Save : if this option is checked, the software will automatically save the project after every main step (Acquisition, Alignment, Mesh Generation)
+; Compressed Projects : if this option is enabled, the software will compress the projet data saving up to 70% of the space on the disk. The compressed project can not be loaded by previous versions of the software
+; Min RI sample number : the minimum number of points for an acquisition to be considered valid. Under the established threshold, all the acquisitions will be automatically discarded
-This page configures how the software integrates with the Exocad CAD Platform or other Prosthesis CAD software. The configurations are:
+=== Multi Die Parameter ===
-* A Dental CAD section with:
+The parameters in this section are specific to the Multi-Die support. It is suggested not to modify these parameters but to use the specific multi-die calibration instead.
-** '''Implants''' : the path on the disk with all the implant libraries
-** '''DentalCad''' : the Exocad ''DentalCadApp.exe'' path, used by the ''Auto Start Dental Cad'' feature
-** '''Format''' : the format used by the software to export the meshes. You can read more in the [[Man_DataExport#Automatic_Export|Automatic Export]] page
-* A '''Dental Number Settings''' section with an option to use the US (Universal) teeth numbering scheme instead of the default FDI numbering scheme
-* A Final Trasformation section, better explained in the [[Man_DataExport#Final_transformation|Final Transformation]] page
-* Other Options like:
-** '''Auto Start Dental Cad''' : if this option is checked, OpticalRevEng Dental will automatically start the CAD design after a succesful export to the Exocad CAD Platform
-** '''Auto Close''' : if this option is checked, OpticalRevEng Dental will be automatically closed after a succesful export to the Exocad CAD Platform
-** '''Separate Stumps''' : if this option is checked, every stump will be exported as a single file instead of being exported merged together with the rest of the jaw data
-[[File:Dental_2_5_options_dental_protesis.jpg|center]]
+{{Screenshot|Dental_3_5_options_dental_general.JPG}}
-==Orthodontic, Scheletric and Impression==
+== Wizard ==
-This three pages share the same function but are applied to specific '''Structurated Projects'''.<br/>
+=== Wizard Option ===
-There are 2 sections:
+This section allows to change the workflow of the Step-By-Step wizard
-*A Path section with:
+; Check Articulator Alignment : if this option is checked, the software will show the result of the alignment with the articulation during the Step-By-Step Wizard
-** '''Path''' : the folder where the software will export the data for this specific project. If empty, the data will be exported in the OpticalRevEng Dental Project folder
+; Show Parallel Mesh Generation : if this option is checked, the software will show a function to generate the Meshes during the next scanning step and not at the specific Mesh Generation Step. This function is longer a valid option to speed up the project
-** '''Pattern''' : the directory and the file name format used to save the files on the disk. Some special characters starting with ''%'' will be replaced by specific data coming from the project, as shown in the Legend.
+; Stumps Manual Cut : if this option is checked, the software will show the user an additional Manual Cut step for every stump in the project
-* A Final Trasformation section, better explained in the [[Man_DataExport#Final_transformation|Final Transformation]] page
+; Auto Export to Cad: automatically exports the generated STL file to the connected CAD
+; Skip Opt Implant Library Alignment: allows to skip the library alingment step to aling the markers to the library in another software
-[[File:Dental_2_5_options_dental_ortho.jpg|center]]
+=== Wizard Auto Cut ===
+This section allows to enable and disable the automatic cut of duplicated surface for the entire Step-By-Step wizard or only for some elements
+{{Screenshot|Dental_3_5_options_dental_wizard.JPG}}
+{{Navigation|Dental_Options_Global|Dental_Options_Interactor}}

Difference between revisions of "Dental Options Dental/pt-br"

Latest revision as of 14:30, 29 August 2016

Contents

Dental

Geral

Project Managment

Multi Die Parameter

Wizard

Wizard Option

Wizard Auto Cut

Navigation menu

Personal tools

Namespaces

Variants

Views

More

Search

Navigation

Tools

In other languages

Print/export