Accessories

From Open Tech Dental Wiki 4.0
Revision as of 19:27, 17 September 2015 by Scaierman (talk | contribs)
Jump to: navigation, search


Acessórios

Os escaners Open Technologies vêm com um conjunto fixo de acessórios básicos e alguns acessórios extras dependendo do específico modelo de escaner .

Kit de Base

Cada escaner vem com um Kit Básico, dentro de uma caixa. Contém: suporte de modelo, suporte do multi-die e do kit de calibração.

Suporte de Modelo

O Suporte de Modelo é o principal suporte utilizado para colocar mandíbulas ou outros objetos dentro do escaner. Ele coloca o objeto na melhor posição possível para a aquisição do scanner.

É importante manter o suporte de modelo limpo e preto para reduzir as possíveis interferências entre o suporte de modelo e o objeto durante a fase de aquisição.

300px 300px

Multi-Die Support

The Multi-Die support is used to acquire multiple stumps with a single acquisition. The position are later automatically identified by the software.

It's important to keep the model holder clean and black to reduce the possible interferences between the model holder and the object during the acquisition phase.

Model multidie big.png Model multidie small.png

Calibration Kit

The Calibration Kit is a planar surface with a pattern of circles, placed on a bended support.
Every calibration kit is measured and analized with high-precision machines.
The measurement is then saved on a xml file and every kit has it's own xml description file.
The kit is used to recalibrate the optical head of the scanner.

It's really important to handle the kit with care and to avoid touching the planar surface. Every modification of the planar surface, like scratches or dirt, can make the calibration system unreliable.

Calibration kit.jpg

Dynamic Articulation Module

In order to use the dynamic articulation module, some special supports are needed. A specific Axis Calibration Object and a special Mounting Plate for every supported articulator.

Mounting Plates

Up to the present, our dynamic articulation module supports 4 different mounting plates.

  • Artex : Basetta artex.jpg
  • Kavo : Basetta cavo.jpg
  • Adesso : Basetta adesso.jpg
  • Sam : Basetta sam.jpg

Axis Calibration Object

This is a specific object, which fits on every mounting plate, used to calibrate the movement system for the Dynamic Articulation Module.

It's important to keep the object clean and handle it with care. Every modification of the object surface, like scratches or dirt, can make the calibration system unreliable.

Kavo oggettotest.jpg