Difference between revisions of "Accessories"

From Open Tech Dental Wiki 4.0
Jump to: navigation, search
(Marked this version for translation)
Line 2: Line 2:
 
{{DISPLAYTITLE:Accessories}}
 
{{DISPLAYTITLE:Accessories}}
 
<translate>
 
<translate>
=Accessories=
+
=Accessories= <!--T:2-->
  
 +
<!--T:3-->
 
The Open Technologies Scanners comes with a fixed set of base accessories and some extra accessories that depends on the specific scanner model.
 
The Open Technologies Scanners comes with a fixed set of base accessories and some extra accessories that depends on the specific scanner model.
  
==Base Kit==
+
==Base Kit== <!--T:4-->
  
 +
<!--T:5-->
 
The Base Kit comes with every scanner inside a case. It's made by the model holder, the multi-die holder and the calibration kit.
 
The Base Kit comes with every scanner inside a case. It's made by the model holder, the multi-die holder and the calibration kit.
  
===Model Holder===
+
===Model Holder=== <!--T:6-->
  
 +
<!--T:7-->
 
The Model Holder is the main support used to place jaws or other objects inside the scanner. It place the object in the best possible position for the scanner acquisition.
 
The Model Holder is the main support used to place jaws or other objects inside the scanner. It place the object in the best possible position for the scanner acquisition.
  
 +
<!--T:8-->
 
;It's important to keep the model holder clean and black to reduce the possible interferences between the model holder and the object during the acquisition phase.
 
;It's important to keep the model holder clean and black to reduce the possible interferences between the model holder and the object during the acquisition phase.
  
 +
<!--T:9-->
 
[[File:Model_holder_big.png]]
 
[[File:Model_holder_big.png]]
 
[[File:Model_holder_small.png]]
 
[[File:Model_holder_small.png]]
  
===Multi-Die Support===  
+
===Multi-Die Support=== <!--T:10-->
  
 +
<!--T:11-->
 
The Multi-Die support is used to acquire multiple stump with only one acquisition. The position are later automatically identified by the software
 
The Multi-Die support is used to acquire multiple stump with only one acquisition. The position are later automatically identified by the software
  
 +
<!--T:12-->
 
;It's important to keep the model holder clean and black to reduce the possible interferences between the model holder and the object during the acquisition phase.
 
;It's important to keep the model holder clean and black to reduce the possible interferences between the model holder and the object during the acquisition phase.
  
 +
<!--T:13-->
 
[[File:Model_multidie_big.png]]
 
[[File:Model_multidie_big.png]]
 
[[File:Model_multidie_small.png]]
 
[[File:Model_multidie_small.png]]
  
===Calibration Kit===
+
===Calibration Kit=== <!--T:14-->
  
 +
<!--T:15-->
 
The Calibration Kit is a planar surface with a pattern of circles placed on a bended support.<br/>
 
The Calibration Kit is a planar surface with a pattern of circles placed on a bended support.<br/>
 
Every calibration kit is then measured and analized with high-precision machines.<br/>
 
Every calibration kit is then measured and analized with high-precision machines.<br/>
Line 35: Line 44:
 
The kit is used to recalibrate the optical head of the scanner.  
 
The kit is used to recalibrate the optical head of the scanner.  
  
 +
<!--T:16-->
 
;It's really important to handle the kit with care and to avoid touching the planar surface. Every modification of the planar surface like scratches and dirt can make the calibration system unreliable
 
;It's really important to handle the kit with care and to avoid touching the planar surface. Every modification of the planar surface like scratches and dirt can make the calibration system unreliable
  
 +
<!--T:17-->
 
[[File:Calibration_kit.jpg]]
 
[[File:Calibration_kit.jpg]]
  
==Dynamic Articulation Module==
+
==Dynamic Articulation Module== <!--T:18-->
  
 +
<!--T:19-->
 
To support the dynamic articulation module some special supports are needed. A specific '''Axis Calibration Object''' and a special '''Mounting Plate''' for every supported articulator.
 
To support the dynamic articulation module some special supports are needed. A specific '''Axis Calibration Object''' and a special '''Mounting Plate''' for every supported articulator.
  
===Mounting Plates===
+
===Mounting Plates=== <!--T:20-->
  
 +
<!--T:21-->
 
In this moment we support 4 different mounting plantes.
 
In this moment we support 4 different mounting plantes.
  
 +
<!--T:22-->
 
* Artex : [[File:Basetta_artex.jpg|300px|Artex]]
 
* Artex : [[File:Basetta_artex.jpg|300px|Artex]]
 
* Kavo : [[File:Basetta_cavo.jpg|300px|Kavo]]
 
* Kavo : [[File:Basetta_cavo.jpg|300px|Kavo]]
Line 52: Line 66:
 
* Sam : [[File:Basetta_sam.jpg|300px|Sam]]
 
* Sam : [[File:Basetta_sam.jpg|300px|Sam]]
  
===Axis Calibrtion Object===
+
===Axis Calibrtion Object=== <!--T:23-->
  
 +
<!--T:24-->
 
This is a specific object that fits on every mounting plate that is used to calibrate the movement system for the Dynamic Articulation Module.
 
This is a specific object that fits on every mounting plate that is used to calibrate the movement system for the Dynamic Articulation Module.
  
 +
<!--T:25-->
 
;It's important to keep the object clean and handle with care. Every modification of the object surface like scratches and dirt can make the calibration system unreliable
 
;It's important to keep the object clean and handle with care. Every modification of the object surface like scratches and dirt can make the calibration system unreliable
  
 +
<!--T:26-->
 
[[File:Kavo_oggettotest.jpg|upright|]]
 
[[File:Kavo_oggettotest.jpg|upright|]]
 
  </translate>
 
  </translate>

Revision as of 08:22, 29 July 2015

Other languages:
العربية • ‎Deutsch • ‎English • ‎español • ‎français • ‎italiano • ‎日本語 • ‎português do Brasil • ‎română • ‎русский • ‎Türkçe • ‎中文(繁體)‎

Accessories

The Open Technologies Scanners comes with a fixed set of base accessories and some extra accessories that depends on the specific scanner model.

Base Kit

The Base Kit comes with every scanner inside a case. It's made by the model holder, the multi-die holder and the calibration kit.

Model Holder

The Model Holder is the main support used to place jaws or other objects inside the scanner. It place the object in the best possible position for the scanner acquisition.

It's important to keep the model holder clean and black to reduce the possible interferences between the model holder and the object during the acquisition phase.

Model holder big.png Model holder small.png

Multi-Die Support

The Multi-Die support is used to acquire multiple stump with only one acquisition. The position are later automatically identified by the software

It's important to keep the model holder clean and black to reduce the possible interferences between the model holder and the object during the acquisition phase.

Model multidie big.png Model multidie small.png

Calibration Kit

The Calibration Kit is a planar surface with a pattern of circles placed on a bended support.
Every calibration kit is then measured and analized with high-precision machines.
The measurement is then saved on a xml file and every kit has it's own xml description file.
The kit is used to recalibrate the optical head of the scanner.

It's really important to handle the kit with care and to avoid touching the planar surface. Every modification of the planar surface like scratches and dirt can make the calibration system unreliable

Calibration kit.jpg

Dynamic Articulation Module

To support the dynamic articulation module some special supports are needed. A specific Axis Calibration Object and a special Mounting Plate for every supported articulator.

Mounting Plates

In this moment we support 4 different mounting plantes.

  • Artex : Artex
  • Kavo : Kavo
  • Adesso : Adesso
  • Sam : Sam

Axis Calibrtion Object

This is a specific object that fits on every mounting plate that is used to calibrate the movement system for the Dynamic Articulation Module.

It's important to keep the object clean and handle with care. Every modification of the object surface like scratches and dirt can make the calibration system unreliable

Kavo oggettotest.jpg