Wizard Acquisition

Aquisição Assistida

During the Step-By-Step Wizard, it is possible to: acquire single objects or multiple objects in one scan, re-acquire a previously acquired object and integrate all these acquisitions.

Elemento único

Cada vez que um elemento tem de ser adquirido, uma tela de assistência específica mostrará:

• The name of the object to be acquired
• A brief description of what should be scanned
• A selector for the Object Colour
• A Scan Button to start the acquisition
• An Integrate Button to start the integration of a previously acquired object
• An Already Aligned check that shows if this object is already aligned to the rest of the project

É muito fácil de seguir o assistente:

1. Read the object description
2. Put the right object inside the scanner
3. Click Scan
4. If the acquisition is not satisfactory, click again the Scan button to start a new acquisition, or the Integrate button to add data

Copiar da Referência

Sometimes, one element data has already been scanned during another acquisition.

Nestes casos, o software irá mostrar um botão adicional(Copiar da Referência) que, em vez de iniciar uma nova aquisição, irá simplesmente fazer uma cópia do anterior.

Após o passo Cortar Base o software vai automaticamente remover as duplicatas da aquisição.

Multi Aquisição

When acquiring multiple dies or multiple implants, it's better not to carry out a single acquisition for every element.
It is possible to acquire many objects at once.
Just make sure that the objects are completely visible in all their parts and that they are at an adequate distance either on the model holder or on the Multi-Die support.
In these cases, the software will show a Multi-Acquisition Setup step where it is possible to select the objects to be scanned at the same time.

This step will show a list of all the objects that have to be scanned together with the already acquired items. Flag the boxes of the objects that have to be scanned together and, when scanning stumps, flag the Use Multi-Die support option on the bottom of the dialog to use the Multi-Die holder.

Com Multi-Munhão

If the Multi-Die option is selected, the software will set up a specific acquisition for the dies; an image will guide the user in positioning the dies in the Multi-Die holder.
After the acquisition, the software will automatically recognize each single die and return to the Multi-Acquisition Step to allow the acquisition of additional objects.

Sem Multi-Munhão

Se o Multi-Munhão não está selecionado, o software irá adquirir os objetos da maneira usual, mas, na etapa seguinte, exigirá que o usuário identifique manualmente cada um dos objetos.
Um específico passo do assistente vai perguntar qual elemento tem que ser identificado. O usuário tem que:

1. Read from the Wizard Page which object has to be selected
2. Select the specific object, using a Selection Tool
3. Click the button Segment
4. Click the button Next

Quando todos os objectos são identificados, o software retorna ao passo Multi-Aquisição. Se todos os elementos já foram adquiridos, clique em Próximo para continuar com o assistente passo-a-passo.

Integração

By clicking the Integrate button after an acquisition, the Integration mode will be launched.