Wizard Acquisition

ウィザードでの取得

ステップバイステップウィザードでは、単一オブジェクトを取得したり、複数のオブジェクトを1回のスキャンで取得したり、以前取得したオブジェクトを再取得したり、これらすべての取得を統合することができます。

シングルオブジェクト

部品が取得されるたびに、特定のウィザード画面で以下が表示されます:

• 取得されるオブジェクト名
• スキャンされる内容の簡単な説明
• オブジェクトの色のセレクター
• 取得を開始するScan（スキャン）ボタン
• 以前取得されたオブジェクトの統合を開始するIntegrate（統合）ボタン
• このオブジェクトがプロジェクトの残りの部分にアライメントされているかどうかを示す、Already Aligned（アライメント済み）チェック

ウィザードを使うのは非常に簡単です:

1. オブジェクトの説明を確認します
2. 正しいオブジェクトをスキャナー内部に置きます
3. Scanをクリックします
4. 取得に満足できない場合は、Scanボタンを再度クリックして新しい取得を開始するか、またはIntegrateボタンでデータを追加します

アドバンス設定

ウィザード中、取得する部品の種類に応じて、取得計画が自動的に選択されます。

Sometimes it can be useful to use a different strategy for one element.

In that case, click on the button to select a different strategy.

Copy From Reference

Sometimes, one element data has already been scanned during another acquisition.

For example, the acquisition of the healthy and pontics parts of the jaw is similar to the reference acquisition of the entire jaw, except for the stumps, which will be acquired in a separate step.

In these cases, the software will show an additional button (Copy From Reference) that, instead of starting a new acquisition, will simply make a copy of the previous one.

After the Base Cut step, the software will automatically remove the duplicates from the acquisition.

Multi Acquisition

When acquiring multiple dies or multiple implants, it's better not to carry out a single acquisition for every element.
It is possible to acquire many objects at once.
Just make sure that the objects are completely visible in all their parts and that they are at an adequate distance either on the model holder or on the Multi-Die support.
In these cases, the software will show a Multi-Acquisition Setup step where it is possible to select the objects to be scanned at the same time.

This step will show a list of all the objects that have to be scanned together with the already acquired items. Flag the boxes of the objects that have to be scanned together and, when scanning stumps, flag the Use Multi-Die support option on the bottom of the dialog to use the Multi-Die holder.

With Multi-Die

If the Multi-Die option is selected, the software will set up a specific acquisition for the dies; an image will guide the user in positioning the dies in the Multi-Die holder.
After the acquisition, the software will automatically recognize each single die and return to the Multi-Acquisition Step to allow the acquisition of additional objects.

Without Multi-Die

If the Multi-Die is not selected, the software will acquire the objects and, in the following step, require the user to manually identify each object.
A specific Wizard Step will ask which object has to be identified. The user has to:

1. Read from the Wizard Page which object has to be selected
2. Select the specific object, using a Selection Tool
3. Click the button Segment
4. Click the button Next

When the objects are all identified, the software returns to the Multi-Acquisition step. If all the objects have already been aquired, click Next to continue with the Step-By-Step Wizard

Integration

By clicking the Integrate button after an acquisition, the Integration mode will be launched.