Difference between revisions of "Translations:Pc Connection/9/de"

From Open Tech Dental Wiki 4.0
Jump to: navigation, search
(Created page with "The connection of the wire USB depend of the model of the scanner. The models *Easy and *Smart (so much *Big like *Small) have components USB 2.0, instead the model *Deluxe ha...")
 
(No difference)

Latest revision as of 13:17, 27 January 2016

Information about message (contribute)

This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.

Message definition (Pc Connection)
The connection of the USB cable depends on the model of the scanner, as
in the Easy and Smart models (both Small and Big) there are USB 2.0 components, whereas in the
Deluxe model there are USB 3.0 components. Therefore, the USB cable of Easy and
Smart Scanners must be plugged in a port USB 2.0 and the USB cable of the Deluxe model must
be connected to a port USB 3.0. These ports are usually colour-coded, so it's possible to
recognise the 2.0 because of its black colour and the 3.0 because of its blue colour.
The USB cable that Open Technologies provides to connect the scanner to the Computer is a
3.0 USB cable (blue), however the above-mentioned instructions remain valid and
even though the cable is 3.0, if the scanner is an Easy or Smart model it must be plugged
in a USB 2.0.
TranslationThe connection of the wire USB depend of the model of the scanner. The models *Easy and *Smart (so much *Big like *Small) have components USB 2.0, instead the model *Deluxe has components USB 3.0. The wires USB of the *escáneres *Easy and *Smart have to be *inseridos in a port USB 2.0, unlike the wire *Deluxe that it has to be inserted in a port USB 3.0. The ports USB follow a code of colours to be identified: the ports 2.0 are of colour *nigro and the 3.0 are of blue colour. Although the wire USB of *Open *Technologies to connect the scanner to the Computer was a wire with USB 3.0 (blue), the instructions remain cost; then, for the models *Easy and *Smart the dig will have to be connected to a port USB 2.0.

The connection of the wire USB depend of the model of the scanner. The models *Easy and *Smart (so much *Big like *Small) have components USB 2.0, instead the model *Deluxe has components USB 3.0. The wires USB of the *escáneres *Easy and *Smart have to be *inseridos in a port USB 2.0, unlike the wire *Deluxe that it has to be inserted in a port USB 3.0. The ports USB follow a code of colours to be identified: the ports 2.0 are of colour *nigro and the 3.0 are of blue colour. Although the wire USB of *Open *Technologies to connect the scanner to the Computer was a wire with USB 3.0 (blue), the instructions remain cost; then, for the models *Easy and *Smart the dig will have to be connected to a port USB 2.0.

Retrieved from "https://wiki.opentechdental.com/w/index.php?title=Translations:Pc_Connection/9/de&oldid=14611"