Difference between revisions of "Pc Min Requirements/zh-hant"

From Open Tech Dental Wiki 4.0
Jump to: navigation, search
(Created page with "== 最低要求 ==")
(Created page with "=== 軟體 ===")
Line 12: Line 12:
 
== 最低要求 ==
 
== 最低要求 ==
  
=== Software ===
+
=== 軟體 ===
  
 
These are the minimum requirements our software needs:
 
These are the minimum requirements our software needs:

Revision as of 05:45, 18 January 2016


推薦系統

連接到我們掃描儀的電腦必須滿足特定的要求.

為了簡化這一選擇,我們推薦兩種來自戴爾的參考系統:

  1. Alienware(外星人) X51 R2 (搭配 Intel i5) 搭配 Easy and Smart 掃描儀使用
  2. Alienware(外星人) X51 R2 (搭配 Intel i7) 搭配 Deluxe 掃描儀使用

最低要求

軟體

These are the minimum requirements our software needs:

Component Requirement
Operating System Windows 7/8/8.1 (64 bit)
CPU Intel® Quad Core ™ or Better
RAM 8Gb RAM or Better
Video Card NVIDIA GeForce GTX 560 Ti or Better *
NVIDIA GeForce GTX 660 or Better *
NVIDIA GeForce GTX 745 or Better *

The Video Card has important additional requirements:

  • Only NVIDIA GeForce cards are supported by the system
  • The NVIDIA QUADRO line is not supported
  • The name scheme for the NVIDIA cards is complex, as specified in this page. To check if a card is better than another, check the 'Core Config' column of the table. A card with less than 300:40:30 cores is not supported. Particular attention has to be given to the appendix of the card name. E.g. the GTX 560 Ti is good enough but the GTX 560M is not.

Scanner Connection

Different models of scanners have different connection requirements; check here the connection that each scanning system needs.

USB 2.0 Scanner with 4 cables

The scanning systems produced before 2015 can be connected to a Computer through 4 cables:

  • 2 USB 2.0 Ports that have to be directly connected to the Computer's motherboard (External Hubs are not supported). Every port needs to supply at least 500mA
  • 1 USB 2.0 or 3.0 Port
  • 1 HDMI Port

The USB 2.0 system is not 100% compatible with the USB 3.0 system. If this scanner model is connected to a USB 3.0 port, the system may freeze or not properly work.

USB 3.0 Scanner with 2 cables

The 2015's scanning system can be connected to a Computer through only 2 cables:

  • 1 USB 3.0 Port that has to be directly connected to the Computer's motherboard. Only Intel C220 or Better and Rensas USB 3.0 are supported. Other USB chipsets could not properly work.
  • 1 HDMI Port