Difference between revisions of "Accessories"
m |
m |
||
| Line 45: | Line 45: | ||
<!--T:16--> | <!--T:16--> | ||
| − | ;It's really important to handle the kit with care and to avoid touching the planar surface. Every modification of the planar surface, like scratches | + | ;It's really important to handle the kit with care and to avoid touching the planar surface. Every modification of the planar surface, like scratches or dirt, can make the calibration system unreliable. |
<!--T:17--> | <!--T:17--> | ||
Revision as of 07:44, 31 August 2015
Contents
Accessories
The Open Technologies' Scanners come with a fixed set of basic accessories and some extra accessories that depend on the specific scanner model.
Base Kit
The Basic Kit comes with every scanner, inside a case. It's made by: the model holder, the multi-die holder and the calibration kit.
Model Holder
The Model Holder is the main support used to place jaws or other objects inside the scanner. It places the object in the best possible position for the scanner acquisition.
- It's important to keep the model holder clean and black to reduce the possible interferences between the model holder and the object during the acquisition phase.
Multi-Die Support
The Multi-Die support is used to acquire multiple stumps with a single acquisition. The position are later automatically identified by the software.
- It's important to keep the model holder clean and black to reduce the possible interferences between the model holder and the object during the acquisition phase.
Calibration Kit
The Calibration Kit is a planar surface with a pattern of circles, placed on a bended support.
Every calibration kit is measured and analized with high-precision machines.
The measurement is then saved on a xml file and every kit has it's own xml description file.
The kit is used to recalibrate the optical head of the scanner.
- It's really important to handle the kit with care and to avoid touching the planar surface. Every modification of the planar surface, like scratches or dirt, can make the calibration system unreliable.
Dynamic Articulation Module
In order to use the dynamic articulation module, some special supports are needed. A specific Axis Calibration Object and a special Mounting Plate for every supported articulator.
Mounting Plates
Up to the present, our dynamic articulation module supports 4 different mounting plates.
- Artex :
- Kavo :
- Adesso :
- Sam :
Axis Calibration Object
This is a specific object, which fits on every mounting plate, used to calibrate the movement system for the Dynamic Articulation Module.
- It's important to keep the object clean and handle it with care. Every modification of the object surface, like scratches or dirt, can make the calibration system unreliable.
