Difference between revisions of "Wiz Acquisition/it"

From Open Tech Dental Wiki 4.0
Jump to: navigation, search
(Created page with "Ogni volta che un elemento deve essere acquisito, un passo specifico del Wizard mostrerà:")
(Created page with "* Il nome dell'oggetto da acquisire * Una breve descrizione di cosa deve venire scansionare * Un menu per selezionare ''Il Colore dell'Oggetto'' * Un Bottone ''Scansiona'' per...")
Line 9: Line 9:
 
Ogni volta che un elemento deve essere acquisito, un passo specifico del Wizard mostrerà:
 
Ogni volta che un elemento deve essere acquisito, un passo specifico del Wizard mostrerà:
  
* The name of the object to be acquired
+
* Il nome dell'oggetto da acquisire
* A brief description of what should be scanned
+
* Una breve descrizione di cosa deve venire scansionare
* A selector for the ''Object Colour''
+
* Un menu per selezionare ''Il Colore dell'Oggetto''
* A ''Scan'' Button to start the acquisition
+
* Un Bottone ''Scansiona'' per lanciare l'acquisizione
* An ''Integrate'' Button to start the integration of a previously acquired object
+
* Un Bottene ''Integra'' per lanciare l'integrazione di un oggetto scansionato in precedenza
* An ''Already Aligned'' check that shows if this object is already aligned to the rest of the project
+
* Una spunta ''Già allineato'' che mostra se quest'oggetto è già allineato al resto del progetto
  
 
It's very easy to follow the wizard:
 
It's very easy to follow the wizard:

Revision as of 16:05, 5 November 2015


Acquisizione Guidata

Seguendo il Wizard è possibile: acquisire singoli oggetti o vari oggetti in una sola scansione, ri-acquisire un oggetto già scansionato e integrare tutte queste acquisizioni.

Oggetto Singolo

Ogni volta che un elemento deve essere acquisito, un passo specifico del Wizard mostrerà:

  • Il nome dell'oggetto da acquisire
  • Una breve descrizione di cosa deve venire scansionare
  • Un menu per selezionare Il Colore dell'Oggetto
  • Un Bottone Scansiona per lanciare l'acquisizione
  • Un Bottene Integra per lanciare l'integrazione di un oggetto scansionato in precedenza
  • Una spunta Già allineato che mostra se quest'oggetto è già allineato al resto del progetto

It's very easy to follow the wizard:

  1. Read the object description
  2. Put the right object inside the scanner
  3. Click Scan
  4. If the acquisition is not satisfactory, click again the Scan button to start a new acquisition, or the Integrate button to add data

Dental 2 5 wizAcquire.jpg

Copy From Reference

Sometimes, one element data has already been scanned during another acquisition.

For example, the acquisition of the healthy and pontics parts of the jaw is similar to the reference acquisition of the entire jaw, except for the stumps, which will be acquired in a separate step.

In these cases, the software will show an additional button (Copy From Reference) that, instead of starting a new acquisition, will simply make a copy of the previous one.

After the Base Cut step, the software will automatically remove the duplicates from the acquisition.

Dental 2 5 wizHealthyAcquire.jpg

Multi Acquisition

When acquiring multiple dies or multiple implants, it's better not to carry out a single acquisition for every element.
It is possible to acquire many objects at once.
Just make sure that the objects are completely visible in all their parts and that they are at an adequate distance either on the model holder or on the Multi-Die support.
In these cases, the software will show a Multi-Acquisition Setup step where it is possible to select the objects to be scanned at the same time.

This step will show a list of all the objects that have to be scanned together with the already acquired items. Flag the boxes of the objects that have to be scanned together and, when scanning stumps, flag the Use Multi-Die support option on the bottom of the dialog to use the Multi-Die holder.

Dental 2 5 wizMultiStump.jpg

With Multi-Die

If the Multi-Die option is selected, the software will set up a specific acquisition for the dies; an image will guide the user in positioning the dies in the Multi-Die holder.
After the acquisition, the software will automatically recognize each single die and return to the Multi-Acquisition Step to allow the acquisition of additional objects.

Dental 2 5 wizMultiDieAcquisition.jpg

Without Multi-Die

If the Multi-Die is not selected, the software will acquire the objects and, in the following step, require the user to manually identify each object.
A specific Wizard Step will ask which object has to be identified. The user has to:

  1. Read from the Wizard Page which object has to be selected
  2. Select the specific object, using a Selection Tool
  3. Click the button Segment
  4. Click the button Next

Dental 2 5 wizStumpSegment.gif

When the objects are all identified, the software returns to the Multi-Acquisition step. If all the objects have already been aquired, click Next to continue with the Step-By-Step Wizard

Dental 2 5 wizMultiStump-after.jpg

Integration

By clicking the Integrate button after an acquisition, the Integration mode will be launched.

Dental 2 5 wiz prev.png Homebutton.png Dental 2 5 wiz next.png