Difference between revisions of "Pc Connection/zh-hant"

From Open Tech Dental Wiki 4.0
Jump to: navigation, search
(Created page with "連接電腦")
 
(Importing a new version from external source)
 
(7 intermediate revisions by one other user not shown)
Line 2: Line 2:
 
{{DISPLAYTITLE:Scanner's connection|noerror}}
 
{{DISPLAYTITLE:Scanner's connection|noerror}}
  
−
== Connect the Scanner ==   
+
== 连接扫描器 ==   
  
−
As you can see in the following pictures, on the back of the scanner there are, from left to right, the
+
如下图所示，扫描器的背面自左至右为：电源开关、电源线接口、HDMI端口和USB端口：
−
power switch, the power cable port, the HDMI port and the USB port:
 
  
 
{{Big image|Big.png}}  
 
{{Big image|Big.png}}  
  
−
''Scanner's connection Big/Deluxe''
+
''扫描器连接Big/Deluxe''
  
 
{{Big image|Small.png}}
 
{{Big image|Small.png}}
  
−
''Scanner's connection Small''
+
''扫描器连接(Small)''
  
−
The power cable is an average 230V cable and must be connected to a power line that
+
电源电缆的平均电压为230V，必须连接到可以在工作所有阶段保持该电压的电源线上，并且防止过载和短路。<br/>HDMI电缆必须连接到计算机显卡的HDMI端口中。计算机中此端口的位置可能会根据不同计算机品牌和型号而有所不同。在我们提供的计算机Dell的Alienware i5和i7中，这个HDMI端口位于左下方：
−
can hold such voltage in all phases of work and that is protected from overloads and
 
−
short-circuits. <br/> The HDMI cable must be connected to the Computer, in the Graphic Card's HDMI port. The location of this port in the computer may vary according to the Computer's brand and model. In the Computers we provide, Dell's Alienware i5 and i7, this HDMI port is on the bottom-left side:
 
  
 
{{Big image|Pc.png}}  
 
{{Big image|Pc.png}}  
  
−
The connection of the USB cable depends on the model of the scanner, as
+
USB接线的连接取决于扫描器的型号
−
in the Easy and Smart models (both Small and Big) there are USB 2.0 components, whereas in the
+
在Easy和Smart型号（Small和Big）中都有USB 2.0组件，在
−
Deluxe model there are USB 3.0 components. Therefore, the USB cable of Easy and
+
Deluxe型号上是USB 3.0接口。因此，Easy与Smart型号的USB接线必须插入USB 2.0的端口，Delux型号的接线必须插入USB3.0的端口。这些接口通常是颜色编码的，所以可以区分，2.0是黑色，3.0是蓝色。Open Technologies在扫描器上提供的连接线是USB 3.0（蓝色）的，然而上述的说明依然有效，即使接线是3.0，在连接Easy或Smart型号时还是要插入USB2.0接口。
−
Smart Scanners must be plugged in a port USB 2.0 and the USB cable of the Deluxe model must
 
−
be connected to a port USB 3.0. These ports are usually colour-coded, so it's possible to
 
−
recognise the 2.0 because of its black colour and the 3.0 because of its blue colour.
 
−
The USB cable that Open Technologies provides to connect the scanner to the Computer is a
 
−
3.0 USB cable (blue), however the above-mentioned instructions remain valid and
 
−
even though the cable is 3.0, if the scanner is an Easy or Smart model it must be plugged
 
−
in a USB 2.0.
 

Latest revision as of 12:13, 1 August 2017


连接扫描器

如下图所示，扫描器的背面自左至右为：电源开关、电源线接口、HDMI端口和USB端口：

Big.png

扫描器连接Big/Deluxe

Small.png

扫描器连接(Small)

电源电缆的平均电压为230V，必须连接到可以在工作所有阶段保持该电压的电源线上，并且防止过载和短路。
HDMI电缆必须连接到计算机显卡的HDMI端口中。计算机中此端口的位置可能会根据不同计算机品牌和型号而有所不同。在我们提供的计算机Dell的Alienware i5和i7中，这个HDMI端口位于左下方：

Pc.png

USB接线的连接取决于扫描器的型号 在Easy和Smart型号（Small和Big）中都有USB 2.0组件，在 Deluxe型号上是USB 3.0接口。因此，Easy与Smart型号的USB接线必须插入USB 2.0的端口，Delux型号的接线必须插入USB3.0的端口。这些接口通常是颜色编码的，所以可以区分，2.0是黑色，3.0是蓝色。Open Technologies在扫描器上提供的连接线是USB 3.0（蓝色）的，然而上述的说明依然有效，即使接线是3.0，在连接Easy或Smart型号时还是要插入USB2.0接口。

Retrieved from "https://wiki.opentechdental.com/w/index.php?title=Pc_Connection/zh-hant&oldid=26781"