Difference between revisions of "Pc Connection/de"

From Open Tech Dental Wiki 4.0
Jump to: navigation, search
(Created page with "''Small-Scanneranschluss''")
(Created page with "The connection of the wire USB depend of the model of the scanner. The models *Easy and *Smart (so much *Big like *Small) have components USB 2.0, instead the model *Deluxe ha...")
 
(One intermediate revision by the same user not shown)
Line 14: Line 14:
 
''Small-Scanneranschluss''
 
''Small-Scanneranschluss''
  
The power cable is an average 230V cable and must be connected to a power line that
+
Das 230V-Standardstromkabel muss an eine Stromversorgung angeschlossen werden, die die Spannung in allen Betriebsphasen sicherstellt und die vor Strombelastungen und Kurzschlüssen geschützt ist.
can hold such voltage in all phases of work and that is protected from overloads and
+
Das HDMI-Kabel muss durch den HDMI-Anschluss (mit der jeweiligen Grafikkarte) an den Computer angeschlossen werden. Die Position dieses Anschlusses ist vom PC-Modell abhängig. Bei unseren Computern - Alienware i5 und i7 von Dell - ist der HDMI-Anschluss unten links zu finden:
short-circuits. <br/> The HDMI cable must be connected to the Computer, in the Graphic Card's HDMI port. The location of this port in the computer may vary according to the Computer's brand and model. In the Computers we provide, Dell's Alienware i5 and i7, this HDMI port is on the bottom-left side:
 
  
 
{{Big image|Pc.png}}  
 
{{Big image|Pc.png}}  
  
The connection of the USB cable depends on the model of the scanner, as
+
The connection of the wire USB depend of the model of the scanner. The models *Easy and *Smart (so much *Big like *Small) have components USB 2.0, instead the model *Deluxe has components USB 3.0. The wires USB of the *escáneres *Easy and *Smart have to be *inseridos in a port USB 2.0, unlike the wire *Deluxe that it has to be inserted in a port USB 3.0. The ports USB follow a code of colours to be identified: the ports 2.0 are of colour *nigro and the 3.0 are of blue colour. Although the wire USB of *Open *Technologies to connect the scanner to the Computer was a wire with USB 3.0 (blue), the instructions remain cost; then, for the models *Easy and *Smart the dig will have to be connected to a port USB 2.0.
in the Easy and Smart models (both Small and Big) there are USB 2.0 components, whereas in the
 
Deluxe model there are USB 3.0 components. Therefore, the USB cable of Easy and
 
Smart Scanners must be plugged in a port USB 2.0 and the USB cable of the Deluxe model must
 
be connected to a port USB 3.0. These ports are usually colour-coded, so it's possible to
 
recognise the 2.0 because of its black colour and the 3.0 because of its blue colour.
 
The USB cable that Open Technologies provides to connect the scanner to the Computer is a
 
3.0 USB cable (blue), however the above-mentioned instructions remain valid and
 
even though the cable is 3.0, if the scanner is an Easy or Smart model it must be plugged
 
in a USB 2.0.
 

Latest revision as of 13:17, 27 January 2016


Scanneranschluss an den PC

Wie in den Bildern ersichtlich, sind auf der hinteren Seite des Scanners, von links nach rechts, der Stromschalter, der Stromanschluss, der HDMI- und der USB-Anschluss zu finden:

Big.png

Big/Deluxe-Scanneranschluss

Small.png

Small-Scanneranschluss

Das 230V-Standardstromkabel muss an eine Stromversorgung angeschlossen werden, die die Spannung in allen Betriebsphasen sicherstellt und die vor Strombelastungen und Kurzschlüssen geschützt ist. Das HDMI-Kabel muss durch den HDMI-Anschluss (mit der jeweiligen Grafikkarte) an den Computer angeschlossen werden. Die Position dieses Anschlusses ist vom PC-Modell abhängig. Bei unseren Computern - Alienware i5 und i7 von Dell - ist der HDMI-Anschluss unten links zu finden:

Pc.png

The connection of the wire USB depend of the model of the scanner. The models *Easy and *Smart (so much *Big like *Small) have components USB 2.0, instead the model *Deluxe has components USB 3.0. The wires USB of the *escáneres *Easy and *Smart have to be *inseridos in a port USB 2.0, unlike the wire *Deluxe that it has to be inserted in a port USB 3.0. The ports USB follow a code of colours to be identified: the ports 2.0 are of colour *nigro and the 3.0 are of blue colour. Although the wire USB of *Open *Technologies to connect the scanner to the Computer was a wire with USB 3.0 (blue), the instructions remain cost; then, for the models *Easy and *Smart the dig will have to be connected to a port USB 2.0.