View source for Pc Connection/ro

{{Language bar}}
{{DISPLAYTITLE:Scanner's connection|noerror}}

== Conectați scanerul ==  

As you can see in the following pictures, on the back of the scanner there are, from left to right, the
power switch, the power cable port, the HDMI port and the USB port:

{{Big image|Big.png}} 

''Scanner's connection Big/Deluxe''

{{Big image|Small.png}}

''Scanner's connection Small''

The power cable is an average 230V cable and must be connected to a power line that
can hold such voltage in all phases of work and that is protected from overloads and
short-circuits. <br/> The HDMI cable must be connected to the Computer, in the Graphic Card's HDMI port. The location of this port in the computer may vary according to the Computer's brand and model. In the Computers we provide, Dell's Alienware i5 and i7, this HDMI port is on the bottom-left side:

{{Big image|Pc.png}} 

The connection of the USB cable depends on the model of the scanner, as
in the Easy and Smart models (both Small and Big) there are USB 2.0 components, whereas in the
Deluxe model there are USB 3.0 components. Therefore, the USB cable of Easy and
Smart Scanners must be plugged in a port USB 2.0 and the USB cable of the Deluxe model must
be connected to a port USB 3.0. These ports are usually colour-coded, so it's possible to
recognise the 2.0 because of its black colour and the 3.0 because of its blue colour.
The USB cable that Open Technologies provides to connect the scanner to the Computer is a
3.0 USB cable (blue), however the above-mentioned instructions remain valid and
even though the cable is 3.0, if the scanner is an Easy or Smart model it must be plugged
in a USB 2.0.