View source for Man ProjectCreation/ro

{{Language bar}}
{{DISPLAYTITLE:Project Creation|noerror}}
= Proiect =
Dacă la lansarea directă a software-ului proiectul nu a fost definit într-o altă bază de date, cum ar fi Exocad DentalDB, este necesar să se definească proiectul de scanare. 

Software-ul are un dialog "Project Manager" pentru a colecta toate datele despre elementele care urmează să fie scanate și pentru a pregăti un [[Wiz_Introduction|Step-By-Step Wizard]].

Managerul de proiect va permite să selectați unul dintre tipurile de proiecte disponibile făcând clic pe pictograma respectivă din bara stângă a ferestrei de dialog.

În toate proiectele, utilizatorul trebuie să definească unele '''General Information''':

* The patient ID (Mandatory)
* The doctor ID (Optional)
* A specific project name to save the project on the disk, if none is provided one will be automatically generated based on the patient ID
* A designer name (Optional)
* Notes (Optional)

When the project is defined, confirm it by clicking on the green icon at the bottom of the dialog. The software will create a specific '''Structured Project''' and start the [[Wiz_Introduction|Step-By-Step Wizard]].

== Fixed Prosthesis Project ==

Project Definition enabled by clicking on the Prosthesis icon.

{{Screenshot|Protesi.JPG}}

The prosthesis section is the most complex because of the amount of elements that can be set and which require a tooth by tooth definition. 

Other than the '''General Information''' section, this project shows 2 additional sections

=== Project Definition ===

In the main part of the window, an odontogram is available that allows to define the elements that have to be scanned.

By holding {{Inline button|Key_ctrl.png}} when clicking on a tooth, the last selected item will be copied to the selected tooth. 

By holding {{Inline button|Key_shift.png}} when clicking on a tooth, the last set parameters will be copied to all the teeth between the last tooth and the selected one.

=== Tooth Information ===

The section in the bottom right corner allows to select the ''Tooth Type'' and some ''Other Options'' for each selected element.
The Tooth Types are:

; None : this tooth is not part of the project, it will not be acquired or can be ignored
; Healthy : this tooth is part of the main stone model, it can be acquired with the rest of the model
; Stump : this tooth is a removable die that has to be acquired alone or on the Multi-Die support 
; Pontic : missing tooth in between two stumps, it will be the intermediate element of a bridge
; Implant : there is an implant in this position, therefore a Scan Body will be acquired
; Bite : this tooth is part of an occlusal bite

Every tooth type has a specific color in the project definition scheme.

The Other Options are:

; Gingiva : this element is mounted on an artificial gingiva that has to be acquired separately from the stone model
; Pre-Op: the anatomy of this element is part of an additional model that will be acquired separately and then aligned to the reference stone model
; Waxup : over this tooth position, it's possible to scan a Pre-Modelled Waxup that will be aligned to the rest of the stone model

=== Additional Parameters ===

In the general information section, there are some additional parameters:

==== Articulator Box ====
Select how the models are kept in articulation:
; Matching models : to scan the occlusion if there is no need to use the automatic positioning in Exocad's Virtual Articulator
; Articulator A : to scan the Artex Articulator and to use the same in Exocad's Virtual Articulator
; Articulator S : to scan the Sam Articulator and to use the same in Exocad's Virtual Articulator
; Articulator P : to scan the Kavo Articulator and to use the same in Exocad's Virtual Articulator
; Articulator B : to scan the Bioart Articulator and to use the same in Exocad's Virtual Articulator
; Articulator D : to scan the Denar Articulator and to use the same in Exocad's Virtual Articulator

==== Model Type Box ====
Select which specific workflow to use:
; Sectioned Model : default workflow, in which every element is acquired separately and all the information gets merged at the end
; Impression Scan : if the ''Impression Scan Module'' is enabled in the license, check this option to scan an impression and not a stone model
; Quadrant Model : if the ''Concept Quad Scan Module'' is enabled, it is possible to scan all the parts of a Quadrant Tray in just one step
; Unsectioned Model : enable this option if the model to be scanned is not sectioned, the scanner will not require a separate scan for every die 

Here below an example of a defined prosthesis project for a 3-elements bridge with a stone antagonist:

{{Screenshot|Project definition.jpg}}

== Multi-Die Project ==

Use the Multi-Die Project to scan different dies from different patients in one single project:

{{Screenshot|Dental_3_5_projectCreation-multiDie.JPG}}

To set the case, click on each multi-die position and define the name of each patient in the ''Patient'' field.

To scan a Waxup for the selected stump, select the Waxup box.

== Orthodontic/Scheletric/Impression Project ==

The Orthodontic, Scheletric and Impression Projects are straightforward and similar to one another.

{{Screenshot|Dental_2_5_projectCreation-orthodontic.jpg}}

These projects require the user to select the whole jaws instead of individual teeth.

When the project definition is confirmed, the software will prepare the '''Project Tree''' to acquire the data from the scanner.

== Project Editing ==

If the project definition needs to be changed while already in use, it is possible to select the '''Edit Project''' tool in the ''File Menu'' or in the ''Project Toolbar'' (See [[Support_Toolbars_And_Menus|Support Toolbars And Menus]]).  

This tool will open again the '''Project Manager''' with the current project definition. It is possible to change the project definition and the parameters of every tooth.

When the editing is confirmed, the software will adapt the ''Project Tree''. Editing an already scanned, or partially scanned, project can cause data loss.

{{Navigation|Man_StartScreen|Man_Acquisition}}